Lexus Vehicle Models NX 2022-present
Lexus Vehicle Models NX 2022-present Torque Specifications
Complete Lexus Vehicle Models NX 2022-present torque specifications guide. Includes factory-specified torque values, torque sequences, and technical specifications for all components including body, brakes, drivetrain, electrical, emissions sensors, fuel, exhaust, HVAC, and suspension. Essential information for proper assembly and maintenance.
Updated
Important Information
Safety guidelines and reference information for proper torque application
Safety First
- Always verify torque specifications with your vehicle's factory service manual
- Use properly calibrated torque wrenches
- Replace all torque-to-yield (TTY) bolts - they are single-use only
- When in doubt, consult a professional mechanic
Quick Reference Guide
Quick Reference Guide
ft-lbs → Nm
× 1.356
ft-lbs → kg-m
× 0.138
Nm → ft-lbs
× 0.738
in-lbs → ft-lbs
× 0.083
Common Torque Patterns
Star Pattern
Used for wheels and other circular bolt patterns
Cross Pattern
Used for gaskets and cover plates
Sequential Pattern
Used for head bolts and other critical components
Common Mistakes to Avoid
Common Mistakes to Avoid
Over-tightening
Exceeding the specified torque value can stretch or break fasteners, damage threads, or crack components.
Prevention:
Always use a calibrated torque wrench and follow specifications exactly.
Incorrect Torque Sequence
Tightening bolts in the wrong order can cause uneven pressure distribution and potential leaks or damage.
Prevention:
Follow the manufacturer's specified torque sequence pattern.
Dirty Threads
Dirt, rust, or old thread locker can affect torque readings and proper fastener tension.
Prevention:
Clean and inspect all threads before assembly. Use new thread locker if specified.
Reusing TTY Bolts
Torque-to-yield bolts are designed to stretch and must not be reused.
Prevention:
Always replace TTY bolts with new ones. They are single-use only.
Dry vs. Lubricated
Not accounting for whether torque specs are for dry or lubricated fasteners can lead to incorrect tension.
Prevention:
Check if specs are for dry or lubricated threads. Use specified lubricant when required.
Recommended Tools
Recommended Tools
Torque Wrench (1/4" Drive)
Range: 2-25 ft-lbs
Small fasteners, delicate components
Torque Wrench (3/8" Drive)
Range: 10-100 ft-lbs
Most common automotive fasteners
Torque Wrench (1/2" Drive)
Range: 30-250 ft-lbs
Large fasteners, wheels
Angle Gauge
Torque-to-yield (TTY) bolts
Torque Wrench Care
- Calibrate annually or after 5,000 clicks
- Store at lowest setting
- Keep clean and lubricated
Search Specifications
Search by component name, bolt size, or description
Type to search through torque specifications. Use arrow keys to navigate results. Press Enter to select a result.
Torque Calculator
Convert between different torque units
2.4l I4 Engine
Torque specifications for 2.4L-I4 Engine
2.4l I4 Engine
Torque specifications for 2.4L-I4 Engine
Cylinder Head
1 Cylinder Head Bolts
M12 x 1.5
1
Cylinder Head Bolts
M12 x 1.5
Torque Specification
20 ft-lbs (27 N·m)
Important Notes
Estimated value, actual torque may vary depending on manufacturer's recommendations.
Engine Block
1 Main Bearing Bolts
M14 x 1.5
1
Main Bearing Bolts
M14 x 1.5
Torque Specification
27 ft-lbs (37 N·m)
2 Oil Pan Bolts
M10 x 1.5
2
Oil Pan Bolts
M10 x 1.5
Torque Specification
10 ft-lbs (14 N·m)
Crankshaft
1 Flywheel Bolts
M16 x 1.5
1
Flywheel Bolts
M16 x 1.5
Torque Specification
65 ft-lbs (88 N·m)
2 Crankshaft Pulley/Harmonic Balancer Bolt
M18 x 1.5
2
Crankshaft Pulley/Harmonic Balancer Bolt
M18 x 1.5
Torque Specification
162 ft-lbs (220 N·m)
Camshaft
1 Camshaft Sprocket Bolt
M14 x 1.5
1
Camshaft Sprocket Bolt
M14 x 1.5
Torque Specification
52 ft-lbs (71 N·m)
Valvetrain
1 Valve Cover Bolts
M8 x 1.25
1
Valve Cover Bolts
M8 x 1.25
Torque Specification
52 in-lbs (6 N·m)
2 Rocker Arms/Shafts Bolts
M10 x 1.5
2
Rocker Arms/Shafts Bolts
M10 x 1.5
Torque Specification
20 ft-lbs (27 N·m)
Timing System
1 Timing Belt/Chain Tensioner Bolt
M12 x 1.5
1
Timing Belt/Chain Tensioner Bolt
M12 x 1.5
Torque Specification
18 ft-lbs (24 N·m)
Intake System
1 Throttle Body Bolts
M8 x 1.25
1
Throttle Body Bolts
M8 x 1.25
Torque Specification
8 ft-lbs (11 N·m)
2 Intake Manifold Bolts
M12 x 1.5
2
Intake Manifold Bolts
M12 x 1.5
Torque Specification
18 ft-lbs (24 N·m)
Exhaust System
1 Exhaust Manifold/Headers Bolts
M14 x 1.5
1
Exhaust Manifold/Headers Bolts
M14 x 1.5
Torque Specification
30 ft-lbs (41 N·m)
Fuel System
1 Fuel Rail Bolts
M10 x 1.5
1
Fuel Rail Bolts
M10 x 1.5
Torque Specification
14 ft-lbs (19 N·m)
2 Fuel Injector Bolts
M8 x 1.25
2
Fuel Injector Bolts
M8 x 1.25
Torque Specification
8 ft-lbs (11 N·m)
Ignition System
1 Spark Plugs
M14 x 1.25
1
Spark Plugs
M14 x 1.25
Torque Specification
20 ft-lbs (27 N·m)
2 Ignition Coil Bolt
M8 x 1.25
2
Ignition Coil Bolt
M8 x 1.25
Torque Specification
8 ft-lbs (11 N·m)
Cooling System
1 Water Pump Bolts
M12 x 1.5
1
Water Pump Bolts
M12 x 1.5
Torque Specification
18 ft-lbs (24 N·m)
2 Water Pump Pulley Bolts
M12 x 1.5
2
Water Pump Pulley Bolts
M12 x 1.5
Torque Specification
18 ft-lbs (24 N·m)
3 Thermostat Housing Bolts
M10 x 1.5
3
Thermostat Housing Bolts
M10 x 1.5
Torque Specification
8 ft-lbs (11 N·m)
Turbocharger
1 Turbocharger Mounting Bolts
M14 x 1.5
1
Turbocharger Mounting Bolts
M14 x 1.5
Torque Specification
35 ft-lbs (47 N·m)
Important Notes
Estimated value, actual torque may vary depending on manufacturer's recommendations.
2 Turbocharger Oil Feed Line Fittings
M12 x 1.5
2
Turbocharger Oil Feed Line Fittings
M12 x 1.5
Torque Specification
17 ft-lbs (23 N·m)
Important Notes
Estimated value, actual torque may vary depending on manufacturer's recommendations.
3 Intercooler Mounting Bolts
M12 x 1.5
3
Intercooler Mounting Bolts
M12 x 1.5
Torque Specification
17 ft-lbs (23 N·m)
Important Notes
Estimated value, actual torque may vary depending on manufacturer's recommendations.
4 Downpipe Bolts
M14 x 1.5
4
Downpipe Bolts
M14 x 1.5
Torque Specification
27 ft-lbs (37 N·m)
Important Notes
Estimated value, actual torque may vary depending on manufacturer's recommendations.
Transmission
1 Engine Block to Transmission Bellhousing Bolts
M14 x 1.5
1
Engine Block to Transmission Bellhousing Bolts
M14 x 1.5
Torque Specification
35 ft-lbs (47 N·m)
Important Notes
Estimated value, actual torque may vary depending on manufacturer's recommendations.
2.4l I4 Turbo Engine
Torque specifications for 2.4L-I4-TURBO Engine
2.4l I4 Turbo Engine
Torque specifications for 2.4L-I4-TURBO Engine
Cylinder Head
1 Cylinder Head Bolts
M12 x 1.5
1
Cylinder Head Bolts
M12 x 1.5
Torque Specification
20 ft-lbs (27 N·m)
Important Notes
Estimated value, actual torque may vary depending on manufacturer's recommendations.
Engine Block
1 Main Bearing Bolts
M14 x 1.5
1
Main Bearing Bolts
M14 x 1.5
Torque Specification
27 ft-lbs (37 N·m)
2 Oil Pan Bolts
M10 x 1.5
2
Oil Pan Bolts
M10 x 1.5
Torque Specification
10 ft-lbs (14 N·m)
Crankshaft
1 Flywheel Bolts
M16 x 1.5
1
Flywheel Bolts
M16 x 1.5
Torque Specification
65 ft-lbs (88 N·m)
2 Crankshaft Pulley/Harmonic Balancer Bolt
M18 x 1.5
2
Crankshaft Pulley/Harmonic Balancer Bolt
M18 x 1.5
Torque Specification
162 ft-lbs (220 N·m)
Camshaft
1 Camshaft Sprocket Bolt
M14 x 1.5
1
Camshaft Sprocket Bolt
M14 x 1.5
Torque Specification
52 ft-lbs (71 N·m)
Valvetrain
1 Valve Cover Bolts
M8 x 1.25
1
Valve Cover Bolts
M8 x 1.25
Torque Specification
52 in-lbs (6 N·m)
2 Rocker Arms/Shafts Bolts
M10 x 1.5
2
Rocker Arms/Shafts Bolts
M10 x 1.5
Torque Specification
20 ft-lbs (27 N·m)
Timing System
1 Timing Belt/Chain Tensioner Bolt
M12 x 1.5
1
Timing Belt/Chain Tensioner Bolt
M12 x 1.5
Torque Specification
18 ft-lbs (24 N·m)
Intake System
1 Throttle Body Bolts
M8 x 1.25
1
Throttle Body Bolts
M8 x 1.25
Torque Specification
8 ft-lbs (11 N·m)
2 Intake Manifold Bolts
M12 x 1.5
2
Intake Manifold Bolts
M12 x 1.5
Torque Specification
18 ft-lbs (24 N·m)
Exhaust System
1 Exhaust Manifold/Headers Bolts
M14 x 1.5
1
Exhaust Manifold/Headers Bolts
M14 x 1.5
Torque Specification
30 ft-lbs (41 N·m)
Fuel System
1 Fuel Rail Bolts
M10 x 1.5
1
Fuel Rail Bolts
M10 x 1.5
Torque Specification
14 ft-lbs (19 N·m)
2 Fuel Injector Bolts
M8 x 1.25
2
Fuel Injector Bolts
M8 x 1.25
Torque Specification
8 ft-lbs (11 N·m)
Ignition System
1 Spark Plugs
M14 x 1.25
1
Spark Plugs
M14 x 1.25
Torque Specification
20 ft-lbs (27 N·m)
2 Ignition Coil Bolt
M8 x 1.25
2
Ignition Coil Bolt
M8 x 1.25
Torque Specification
8 ft-lbs (11 N·m)
Cooling System
1 Water Pump Bolts
M12 x 1.5
1
Water Pump Bolts
M12 x 1.5
Torque Specification
18 ft-lbs (24 N·m)
2 Water Pump Pulley Bolts
M12 x 1.5
2
Water Pump Pulley Bolts
M12 x 1.5
Torque Specification
18 ft-lbs (24 N·m)
3 Thermostat Housing Bolts
M10 x 1.5
3
Thermostat Housing Bolts
M10 x 1.5
Torque Specification
8 ft-lbs (11 N·m)
Turbocharger
1 Turbocharger Mounting Bolts
M14 x 1.5
1
Turbocharger Mounting Bolts
M14 x 1.5
Torque Specification
35 ft-lbs (47 N·m)
Important Notes
Estimated value, actual torque may vary depending on manufacturer's recommendations.
2 Turbocharger Oil Feed Line Fittings
M12 x 1.5
2
Turbocharger Oil Feed Line Fittings
M12 x 1.5
Torque Specification
17 ft-lbs (23 N·m)
Important Notes
Estimated value, actual torque may vary depending on manufacturer's recommendations.
3 Intercooler Mounting Bolts
M12 x 1.5
3
Intercooler Mounting Bolts
M12 x 1.5
Torque Specification
17 ft-lbs (23 N·m)
Important Notes
Estimated value, actual torque may vary depending on manufacturer's recommendations.
4 Downpipe Bolts
M14 x 1.5
4
Downpipe Bolts
M14 x 1.5
Torque Specification
27 ft-lbs (37 N·m)
Important Notes
Estimated value, actual torque may vary depending on manufacturer's recommendations.
Transmission
1 Engine Block to Transmission Bellhousing Bolts
M14 x 1.5
1
Engine Block to Transmission Bellhousing Bolts
M14 x 1.5
Torque Specification
35 ft-lbs (47 N·m)
Important Notes
Estimated value, actual torque may vary depending on manufacturer's recommendations.
2.5l I4 Hybrid Engine
Torque specifications for 2.5L-I4-HYBRID Engine
2.5l I4 Hybrid Engine
Torque specifications for 2.5L-I4-HYBRID Engine
Cylinder Head and Engine Block
1 Cylinder Head Bolts
M12 x 1.5
1
Cylinder Head Bolts
M12 x 1.5
Torque Specification
20 ft-lbs (27 N·m)
Important Notes
Estimated value, consult manufacturer's documentation for confirmation.
2 Main Bearing Bolts
M14 x 1.5
2
Main Bearing Bolts
M14 x 1.5
Torque Specification
27 ft-lbs (37 N·m)
Important Notes
Estimated value, consult manufacturer's documentation for confirmation.
Crankshaft and Connecting Rods
1 Connecting Rod Nuts
M10 x 1.5
1
Connecting Rod Nuts
M10 x 1.5
Torque Specification
25 ft-lbs (34 N·m)
Important Notes
Estimated value, consult manufacturer's documentation for confirmation.
2 Flywheel Bolts
M12 x 1.5
2
Flywheel Bolts
M12 x 1.5
Torque Specification
65 ft-lbs (88 N·m)
Important Notes
Estimated value, consult manufacturer's documentation for confirmation.
Valve Train and Timing System
1 Valve Cover Bolts
M8 x 1.25
1
Valve Cover Bolts
M8 x 1.25
Torque Specification
50 in-lbs (6 N·m)
Important Notes
Estimated value, consult manufacturer's documentation for confirmation.
2 Timing Belt/Chain Tensioner Bolt
M10 x 1.5
2
Timing Belt/Chain Tensioner Bolt
M10 x 1.5
Torque Specification
18 ft-lbs (24 N·m)
Important Notes
Estimated value, consult manufacturer's documentation for confirmation.
Intake and Exhaust System
1 Intake Manifold Bolts
M10 x 1.5
1
Intake Manifold Bolts
M10 x 1.5
Torque Specification
18 ft-lbs (24 N·m)
Important Notes
Estimated value, consult manufacturer's documentation for confirmation.
2 Exhaust Manifold/Headers Bolts
M12 x 1.5
2
Exhaust Manifold/Headers Bolts
M12 x 1.5
Torque Specification
30 ft-lbs (41 N·m)
Important Notes
Estimated value, consult manufacturer's documentation for confirmation.
Hybrid System
1 Hybrid System Control Module (HSCM) Mounting Bolts
M8 x 1.25
1
Hybrid System Control Module (HSCM) Mounting Bolts
M8 x 1.25
Torque Specification
12 ft-lbs (16 N·m)
Important Notes
Estimated value, consult manufacturer's documentation for confirmation.
2 Inverter Water Pump Bolts
M8 x 1.25
2
Inverter Water Pump Bolts
M8 x 1.25
Torque Specification
12 ft-lbs (16 N·m)
Important Notes
Estimated value, consult manufacturer's documentation for confirmation.
3 Electric Motor Mounting Bolts
M10 x 1.5
3
Electric Motor Mounting Bolts
M10 x 1.5
Torque Specification
22 ft-lbs (30 N·m)
Important Notes
Estimated value, consult manufacturer's documentation for confirmation.
Body
Torque specifications for Body
Body
Torque specifications for Body
Suspension System
1 Strut/Shock Absorber Mounting Bolts
M12 x 1.5
1
Strut/Shock Absorber Mounting Bolts
M12 x 1.5
Torque Specification
88 ft-lbs (120 N·m)
Important Notes
Torque value estimated based on similar suspension components.
2 Control Arm Bolts
M14 x 1.5
2
Control Arm Bolts
M14 x 1.5
Torque Specification
1. 50 ft-lbs (68 N·m)
2. 90°
Important Notes
Torque sequence involves initial torque and then tightening to a specific angle.
3 Sway Bar Link Nut
M10 x 1.25
3
Sway Bar Link Nut
M10 x 1.25
Torque Specification
39 ft-lbs (53 N·m)
Important Notes
Torque value estimated based on similar sway bar components.
Steering System
1 Steering Gear/Rack Bolts
M12 x 1.5
1
Steering Gear/Rack Bolts
M12 x 1.5
Torque Specification
79 ft-lbs (107 N·m)
Important Notes
Torque value estimated based on similar steering components.
2 Ball Joint Nut
M10 x 1.25
2
Ball Joint Nut
M10 x 1.25
Torque Specification
54 ft-lbs (73 N·m)
Important Notes
Torque value estimated based on similar steering components.
3 Tie Rod End Nut
M8 x 1.0
3
Tie Rod End Nut
M8 x 1.0
Torque Specification
39 ft-lbs (53 N·m)
Important Notes
Torque value estimated based on similar steering components.
Fuel System
1 Fuel Tank Strap Bolts
M6 x 1.0
1
Fuel Tank Strap Bolts
M6 x 1.0
Torque Specification
20 ft-lbs (27 N·m)
Important Notes
Torque value estimated based on similar fuel system components.
2 Fuel Filler Neck Bolts
M6 x 1.0
2
Fuel Filler Neck Bolts
M6 x 1.0
Torque Specification
20 ft-lbs (27 N·m)
Important Notes
Torque value estimated based on similar fuel system components.
Brakes
Torque specifications for Brakes
Brakes
Torque specifications for Brakes
Brake Caliper
1 Brake Caliper Bolts
M10 x 1.5
1
Brake Caliper Bolts
M10 x 1.5
Torque Specification
72 ft-lbs (97 N·m)
Important Notes
Estimated value based on similar components and bolt sizes.
2 Brake Caliper Mounting Bracket Bolts
M12 x 1.5
2
Brake Caliper Mounting Bracket Bolts
M12 x 1.5
Torque Specification
87 ft-lbs (118 N·m)
Important Notes
Estimated value based on similar components and bolt sizes.
Brake Rotor
1 Brake Disc/Drum Retaining Bolts
M8 x 1.25
1
Brake Disc/Drum Retaining Bolts
M8 x 1.25
Torque Specification
30 ft-lbs (41 N·m)
Important Notes
Estimated value based on similar components and bolt sizes.
Brake Hydraulics
1 Brake Hose Banjo Bolt
M6 x 1.0
1
Brake Hose Banjo Bolt
M6 x 1.0
Torque Specification
19 ft-lbs (26 N·m)
Important Notes
Estimated value based on similar components and bolt sizes.
2 Brake Master Cylinder Mounting Bolts
M8 x 1.25
2
Brake Master Cylinder Mounting Bolts
M8 x 1.25
Torque Specification
12 ft-lbs (16 N·m)
Important Notes
Estimated value based on similar components and bolt sizes.
Brake Booster
1 Brake Booster Mounting Bolts
M8 x 1.25
1
Brake Booster Mounting Bolts
M8 x 1.25
Torque Specification
18 ft-lbs (24 N·m)
Important Notes
Estimated value based on similar components and bolt sizes.
Brake Pedal
1 Brake Pedal Assembly Bolts
M8 x 1.25
1
Brake Pedal Assembly Bolts
M8 x 1.25
Torque Specification
18 ft-lbs (24 N·m)
Important Notes
Estimated value based on similar components and bolt sizes.
Abs Sensor
1 ABS Sensor Mounting Bolts
M6 x 1.0
1
ABS Sensor Mounting Bolts
M6 x 1.0
Torque Specification
8 ft-lbs (11 N·m)
Important Notes
Estimated value based on similar components and bolt sizes.
Drivetrain
Torque specifications for Drivetrain
Drivetrain
Torque specifications for Drivetrain
Engine and Transmission Mounting
1 Engine Block to Transmission Bellhousing Bolts
M12 x 1.5
1
Engine Block to Transmission Bellhousing Bolts
M12 x 1.5
Torque Specification
35 ft-lbs (47 N·m)
Important Notes
Estimated value. Proper torque is necessary to prevent transmission movement and damage.
2 Transmission Crossmember Bolts
M14 x 1.5
2
Transmission Crossmember Bolts
M14 x 1.5
Torque Specification
45 ft-lbs (61 N·m)
Important Notes
Estimated value. Proper torque is necessary to prevent transmission movement and damage.
3 Transfer Case Mounting Bolts
M12 x 1.5
3
Transfer Case Mounting Bolts
M12 x 1.5
Torque Specification
35 ft-lbs (47 N·m)
Important Notes
Estimated value. Proper torque is necessary to prevent transfer case movement and damage.
Flywheel and Transmission
1 Flywheel Bolts
M14 x 1.5
1
Flywheel Bolts
M14 x 1.5
Torque Specification
65 ft-lbs (88 N·m)
Important Notes
Proper torque is essential to prevent damage to the flywheel, crankshaft, and transmission.
2 Transmission Oil Pan Bolts
M10 x 1.5
2
Transmission Oil Pan Bolts
M10 x 1.5
Torque Specification
10 ft-lbs (14 N·m)
Important Notes
Proper torque is essential to prevent oil leaks and damage to the transmission.
Drive Axle and Half Shaft
1 Drive Axle/Half Shaft Bolts
M14 x 1.5
1
Drive Axle/Half Shaft Bolts
M14 x 1.5
Torque Specification
66 ft-lbs (90 N·m)
Important Notes
Proper torque is necessary to prevent axle shaft damage and wheel bearing failure.
2 CV Joint/Axle Nut
M18 x 1.5
2
CV Joint/Axle Nut
M18 x 1.5
Torque Specification
160 ft-lbs (217 N·m)
Important Notes
Proper torque is essential to prevent CV joint damage and wheel bearing failure.
3 Drive Axle/Half Shaft Nut
M18 x 1.5
3
Drive Axle/Half Shaft Nut
M18 x 1.5
Torque Specification
110 ft-lbs (150 N·m)
Important Notes
Estimated value. Proper torque is essential to prevent wheel bearing failure and axle shaft damage.
Differential and Transfer Case
1 Differential Cover Bolts
M12 x 1.5
1
Differential Cover Bolts
M12 x 1.5
Torque Specification
25 ft-lbs (34 N·m)
Important Notes
Estimated value. Proper torque is essential to prevent fluid leaks and damage to the differential.
2 Differential Drain/Fill Plug
M14 x 1.5
2
Differential Drain/Fill Plug
M14 x 1.5
Torque Specification
33 ft-lbs (45 N·m)
Important Notes
Proper torque is essential to prevent fluid leaks and damage to the differential.
3 Transfer Case Drain/Fill Plug
M14 x 1.5
3
Transfer Case Drain/Fill Plug
M14 x 1.5
Torque Specification
33 ft-lbs (45 N·m)
Important Notes
Proper torque is essential to prevent fluid leaks and damage to the transfer case.
Propeller/Drive Shaft
1 Propeller/Drive Shaft Bolts
M14 x 1.5
1
Propeller/Drive Shaft Bolts
M14 x 1.5
Torque Specification
66 ft-lbs (90 N·m)
Important Notes
Proper torque is necessary to prevent drive shaft damage and vibration.
Transmission Mounting
1 Transmission Mounting Bolts
M12 x 1.5
1
Transmission Mounting Bolts
M12 x 1.5
Torque Specification
34 ft-lbs (46 N·m)
Important Notes
Proper torque is necessary to prevent transmission movement and damage.
Electrical
Torque specifications for Electrical
Electrical
Torque specifications for Electrical
Alternator
1 Alternator Mounting Bolts
M12 x 1.5
1
Alternator Mounting Bolts
M12 x 1.5
Torque Specification
32.5 ft-lbs (44 N·m)
Important Notes
Estimated average value from the provided range.
Starter Motor
1 Starter Motor Mounting Bolts
M12 x 1.5
1
Starter Motor Mounting Bolts
M12 x 1.5
Torque Specification
32.5 ft-lbs (44 N·m)
Important Notes
Estimated average value from the provided range.
Battery
1 Battery Terminal Nuts
M8 x 1.25
1
Battery Terminal Nuts
M8 x 1.25
Torque Specification
57 in-lbs (6.5 N·m)
Important Notes
Estimated average value from the provided range.
Ignition Coil
1 Ignition Coil Bracket Bolts
M10 x 1.5
1
Ignition Coil Bracket Bolts
M10 x 1.5
Torque Specification
12.5 ft-lbs (17 N·m)
Important Notes
Estimated average value from the provided range.
Fuel Injector
1 Fuel Injector Electrical Connector Bolts
M6 x 1.0
1
Fuel Injector Electrical Connector Bolts
M6 x 1.0
Torque Specification
7.5 in-lbs (0.85 N·m)
Important Notes
Estimated average value from the provided range.
Spark Plug
1 Spark Plug Wire Boots
M8 x 1.25
1
Spark Plug Wire Boots
M8 x 1.25
Torque Specification
12.5 in-lbs (1.7 N·m)
Important Notes
Estimated average value from the provided range.
Emissions Sensors
Torque specifications for Emissions_sensors
Emissions Sensors
Torque specifications for Emissions_sensors
EGR System
1 EGR Valve Bolts
M10 x 1.5
1
EGR Valve Bolts
M10 x 1.5
Torque Specification
13.5 ft-lbs (18.3 N·m)
Important Notes
Estimated average torque value based on similar components.
Oxygen Sensor System
1 Oxygen Sensor Bolts
M12 x 1.25
1
Oxygen Sensor Bolts
M12 x 1.25
Torque Specification
18.5 ft-lbs (25.1 N·m)
Important Notes
Estimated average torque value based on similar components.
Exhaust System
1 Exhaust Manifold/Headers Bolts
M14 x 1.5
1
Exhaust Manifold/Headers Bolts
M14 x 1.5
Torque Specification
30.5 ft-lbs (41.4 N·m)
2 Catalytic Converter to Exhaust Pipe Bolts
M14 x 1.5
2
Catalytic Converter to Exhaust Pipe Bolts
M14 x 1.5
Torque Specification
30.5 ft-lbs (41.4 N·m)
NOx Sensor System
1 NOx Sensor Bolts
M10 x 1.25
1
NOx Sensor Bolts
M10 x 1.25
Torque Specification
18.5 ft-lbs (25.1 N·m)
Important Notes
Estimated average torque value based on similar components.
Fuel Injector System
1 Fuel Injector Bolts (emissions-related)
M8 x 1.25
1
Fuel Injector Bolts (emissions-related)
M8 x 1.25
Torque Specification
8.5 ft-lbs (11.5 N·m)
Important Notes
Estimated average torque value based on similar components.
Emissions Wiring Harness
1 Emissions-related Wiring Harness Bolts
M6 x 1.0
1
Emissions-related Wiring Harness Bolts
M6 x 1.0
Torque Specification
7.5 ft-lbs (10.2 N·m)
Important Notes
Estimated average torque value based on similar components.
Exhaust
Torque specifications for Exhaust
Exhaust
Torque specifications for Exhaust
Exhaust Manifold Headers
1 Exhaust Manifold/Headers Bolts
M10 x 1.25
1
Exhaust Manifold/Headers Bolts
M10 x 1.25
Torque Specification
30 ft-lbs (41 N·m)
Important Notes
Torque value is an average estimate based on typical M10 bolts in exhaust applications.
2 Exhaust Manifold/Headers to Cylinder Head Bolts
M8 x 1.25
2
Exhaust Manifold/Headers to Cylinder Head Bolts
M8 x 1.25
Torque Specification
20 ft-lbs (27 N·m)
Important Notes
Torque value is an average estimate based on typical M8 bolts in exhaust applications.
Exhaust Pipe Connections
1 Exhaust Pipe to Exhaust Manifold/Headers Bolts
M10 x 1.25
1
Exhaust Pipe to Exhaust Manifold/Headers Bolts
M10 x 1.25
Torque Specification
30 ft-lbs (41 N·m)
Important Notes
Torque value is an average estimate based on typical M10 bolts in exhaust applications.
2 Catalytic Converter to Exhaust Pipe Bolts
M10 x 1.25
2
Catalytic Converter to Exhaust Pipe Bolts
M10 x 1.25
Torque Specification
30 ft-lbs (41 N·m)
Important Notes
Torque value is an average estimate based on typical M10 bolts in exhaust applications.
3 Muffler to Exhaust Pipe Bolts
M10 x 1.25
3
Muffler to Exhaust Pipe Bolts
M10 x 1.25
Torque Specification
30 ft-lbs (41 N·m)
Important Notes
Torque value is an average estimate based on typical M10 bolts in exhaust applications.
4 Exhaust Flange Bolts
M8 x 1.25
4
Exhaust Flange Bolts
M8 x 1.25
Torque Specification
22 ft-lbs (30 N·m)
Important Notes
Torque value is an average estimate based on typical M8 bolts in exhaust applications.
Exhaust Support Heat Shield
1 Exhaust Support Brackets Bolts
M8 x 1.25
1
Exhaust Support Brackets Bolts
M8 x 1.25
Torque Specification
18 ft-lbs (24 N·m)
Important Notes
Torque value is an average estimate based on typical M8 bolts in support applications.
2 Exhaust Heat Shield Bolts
M6 x 1.0
2
Exhaust Heat Shield Bolts
M6 x 1.0
Torque Specification
12 ft-lbs (16 N·m)
Important Notes
Torque value is an average estimate based on typical M6 bolts in heat shield applications.
Fuel
Torque specifications for Fuel
Fuel
Torque specifications for Fuel
Fuel Rail and Injector System
1 Fuel Rail Bolts
M12 x 1.5
1
Fuel Rail Bolts
M12 x 1.5
Torque Specification
14.5 ft-lbs (19.7 N·m)
Important Notes
Estimated average torque value for M12 x 1.5 bolts.
2 Fuel Injector Bolts
M8 x 1.25
2
Fuel Injector Bolts
M8 x 1.25
Torque Specification
8.5 ft-lbs (11.5 N·m)
Important Notes
Estimated average torque value for M8 x 1.25 bolts.
3 Fuel Injector Rail Bolts
M8 x 1.25
3
Fuel Injector Rail Bolts
M8 x 1.25
Torque Specification
8.5 ft-lbs (11.5 N·m)
Important Notes
Estimated average torque value for M8 x 1.25 bolts.
Fuel Pump and Tank System
1 Fuel Pump Mounting Bolts
M10 x 1.5
1
Fuel Pump Mounting Bolts
M10 x 1.5
Torque Specification
8.5 ft-lbs (11.5 N·m)
Important Notes
Estimated average torque value for M10 x 1.5 bolts.
2 Fuel Tank Strap Bolts
M14 x 2.0
2
Fuel Tank Strap Bolts
M14 x 2.0
Torque Specification
20 ft-lbs (27 N·m)
Important Notes
Estimated average torque value for M14 x 2.0 bolts.
3 Fuel Filler Neck Bolts
M14 x 2.0
3
Fuel Filler Neck Bolts
M14 x 2.0
Torque Specification
20 ft-lbs (27 N·m)
Important Notes
Estimated average torque value for M14 x 2.0 bolts.
Fuel Filter and Pressure Regulator System
1 Fuel Filter Bolt/Nut
M16 x 2.0
1
Fuel Filter Bolt/Nut
M16 x 2.0
Torque Specification
32.5 ft-lbs (44 N·m)
Important Notes
Estimated average torque value for M16 x 2.0 bolts.
2 Fuel Pressure Regulator Mounting Bolts
M10 x 1.5
2
Fuel Pressure Regulator Mounting Bolts
M10 x 1.5
Torque Specification
12.5 ft-lbs (17 N·m)
Important Notes
Estimated average torque value for M10 x 1.5 bolts.
3 Fuel Line Fittings
M12 x 1.5
3
Fuel Line Fittings
M12 x 1.5
Torque Specification
12.5 ft-lbs (17 N·m)
Important Notes
Estimated average torque value for M12 x 1.5 bolts.
4 Fuel Tank Vent Valve Bolts
M10 x 1.5
4
Fuel Tank Vent Valve Bolts
M10 x 1.5
Torque Specification
12.5 ft-lbs (17 N·m)
Important Notes
Estimated average torque value for M10 x 1.5 bolts.
Hvac
Torque specifications for Hvac
Hvac
Torque specifications for Hvac
Air Conditioning Compressor
1 A/C Compressor Mounting Bolts
M10 x 1.5
1
A/C Compressor Mounting Bolts
M10 x 1.5
Torque Specification
20 ft-lbs (27 N·m)
Important Notes
Estimated value based on similar components and bolt sizes.
2 A/C Compressor Clutch Bolt
M12 x 1.75
2
A/C Compressor Clutch Bolt
M12 x 1.75
Torque Specification
22.5 ft-lbs (30.5 N·m)
Important Notes
Estimated value based on industry standards.
Air Conditioning Condenser
1 A/C Condenser Mounting Bolts
M8 x 1.25
1
A/C Condenser Mounting Bolts
M8 x 1.25
Torque Specification
17.5 ft-lbs (23.7 N·m)
Important Notes
Estimated value based on industry standards.
Air Conditioning Evaporator
1 A/C Evaporator Mounting Bolts
M6 x 1.0
1
A/C Evaporator Mounting Bolts
M6 x 1.0
Torque Specification
12.5 ft-lbs (16.9 N·m)
Important Notes
Estimated value based on industry standards.
Air Conditioning Refrigerant Lines
1 A/C Refrigerant Line Bracket Bolts
M8 x 1.25
1
A/C Refrigerant Line Bracket Bolts
M8 x 1.25
Torque Specification
12.5 ft-lbs (16.9 N·m)
Important Notes
Estimated value based on industry standards.
Air Conditioning Line Fittings
1 A/C Line Fittings
N/A
1
A/C Line Fittings
N/A
Torque Specification
N/A
Important Notes
Hand-tighten only. Do not overtighten.
K120 Transmission
Torque specifications for K120 Transmission
K120 Transmission
Torque specifications for K120 Transmission
Transmission Mounting
1 Transmission Mounting Bolts
M12 x 1.5
1
Transmission Mounting Bolts
M12 x 1.5
Torque Specification
33.5 ft-lbs (45.5 N·m)
Important Notes
Estimated average value from 30-37 ft-lbs (41-50 nm) range.
Transmission Oil Pan
1 Transmission Oil Pan Bolts
M10 x 1.25
1
Transmission Oil Pan Bolts
M10 x 1.25
Torque Specification
10 ft-lbs (13.5 N·m)
Important Notes
Estimated average value from 9-11 ft-lbs (12-15 nm) range.
Transmission Fluid System
1 Transmission Drain and Fill Plugs
M14 x 1.5
1
Transmission Drain and Fill Plugs
M14 x 1.5
Torque Specification
32.5 ft-lbs (44 N·m)
Important Notes
Estimated average value from 29-36 ft-lbs (39-49 nm) range.
2 Transmission Fluid Drain/Fill Plug
M14 x 1.5
2
Transmission Fluid Drain/Fill Plug
M14 x 1.5
Torque Specification
32.5 ft-lbs (44 N·m)
Important Notes
Estimated average value from 29-36 ft-lbs (39-49 nm) range.
K120 Transmission Case
1 K120 Transmission Case Bolts
M14 x 1.5
1
K120 Transmission Case Bolts
M14 x 1.5
Torque Specification
45 ft-lbs (61 N·m)
Important Notes
Estimated average value from 40-50 ft-lbs (54-68 nm) range.
K120 Transmission Bellhousing
1 K120 Transmission Bellhousing Bolts
M12 x 1.5
1
K120 Transmission Bellhousing Bolts
M12 x 1.5
Torque Specification
35 ft-lbs (47.5 N·m)
Important Notes
Estimated average value from 30-40 ft-lbs (41-54 nm) range.
K120 Transmission Pan Gasket
1 K120 Transmission Pan Gasket Bolts
M10 x 1.25
1
K120 Transmission Pan Gasket Bolts
M10 x 1.25
Torque Specification
12.5 ft-lbs (17 N·m)
Important Notes
Estimated average value from 10-15 ft-lbs (14-20 nm) range.
K120 Transmission Filter
1 K120 Transmission Filter Bolts
M10 x 1.25
1
K120 Transmission Filter Bolts
M10 x 1.25
Torque Specification
12.5 ft-lbs (17 N·m)
Important Notes
Estimated average value from 10-15 ft-lbs (14-20 nm) range.
Suspension
Torque specifications for Suspension
Suspension
Torque specifications for Suspension
Strut And Shock Absorber
1 Strut/Shock Absorber Mounting Bolts
M14 x 1.5
1
Strut/Shock Absorber Mounting Bolts
M14 x 1.5
Torque Specification
88 ft-lbs (120 N·m)
Important Notes
Estimated value based on general industry standards.
Control Arm
1 Control Arm Bolts
M16 x 1.5
1
Control Arm Bolts
M16 x 1.5
Torque Specification
97 ft-lbs (132 N·m)
Important Notes
Estimated value based on general industry standards.
2 Upper Control Arm Bushing Bolts
M12 x 1.25
2
Upper Control Arm Bushing Bolts
M12 x 1.25
Torque Specification
45 ft-lbs (61 N·m)
Important Notes
Estimated value based on general industry standards.
3 Lower Control Arm Bolts
M18 x 1.5
3
Lower Control Arm Bolts
M18 x 1.5
Torque Specification
75 ft-lbs (102 N·m)
Important Notes
Estimated value based on general industry standards.
Steering Knuckle
1 Steering Knuckle Bolts
M18 x 1.5
1
Steering Knuckle Bolts
M18 x 1.5
Torque Specification
85 ft-lbs (115 N·m)
Important Notes
Estimated value based on general industry standards.
2 Ball Joint Nut
M14 x 1.5
2
Ball Joint Nut
M14 x 1.5
Torque Specification
54 ft-lbs (73 N·m)
3 Tie Rod End Nut
M12 x 1.25
3
Tie Rod End Nut
M12 x 1.25
Torque Specification
39 ft-lbs (53 N·m)
Sway Bar
1 Sway Bar Link Nut
M12 x 1.25
1
Sway Bar Link Nut
M12 x 1.25
Torque Specification
39 ft-lbs (53 N·m)
Coil Spring
1 Coil Spring Mounting Bolts
M10 x 1.25
1
Coil Spring Mounting Bolts
M10 x 1.25
Torque Specification
35 ft-lbs (47 N·m)
Important Notes
Estimated value based on general industry standards.
Troubleshooting Guide
Common issues, diagnostic steps, and prevention guidelines
Common Issues
Bolt stretching, stripped threads, uneven torque patterns
Common Issues
Bolt stretching, stripped threads, uneven torque patterns
Loose Components
Symptoms:
- Rattling or vibration noises
- Visible movement in components
- Uneven panel gaps
Solutions:
- Clean threads and mounting surfaces
- Replace damaged fasteners
- Apply proper torque in sequence
- Use thread locker if specified
Stripped Fasteners
Symptoms:
- Unable to achieve proper torque
- Fastener spins freely
- Visible thread damage
Solutions:
- Use thread repair kit if appropriate
- Install thread insert (HeliCoil)
- Replace component if threaded hole is damaged
- Upgrade to higher grade fastener if recommended
Overtightened Components
Symptoms:
- Cracked or deformed parts
- Broken fasteners
- Compressed gaskets or seals
Solutions:
- Replace damaged components
- Use new fasteners
- Follow proper torque sequence
- Verify correct torque specifications
Diagnostic Steps
Visual inspection, torque verification, thread assessment
Diagnostic Steps
Visual inspection, torque verification, thread assessment
1
Visual Inspection
Inspect the affected area for any visible signs of damage or wear
- Check for cracks or deformation
- Look for signs of excessive wear
- Verify proper fastener installation
2
Torque Verification
Verify the torque applied to the fasteners
- Check the torque wrench calibration
- Verify the torque specification
- Compare the applied torque to the specification
3
Thread Assessment
Assess the condition of the threads
- Check for signs of thread damage
- Verify the thread type and size
- Check for proper thread engagement
Prevention Guidelines
Best practices, maintenance tips, tool care
Prevention Guidelines
Best practices, maintenance tips, tool care
Best Practices
- Always follow the recommended torque specification
- Use the correct type and size of fasteners
- Verify the torque wrench calibration regularly
Maintenance Tips
- Regularly inspect the affected area for signs of wear or damage
- Replace damaged or worn-out components promptly
- Keep the work area clean and organized
Tool Care
- Regularly clean and maintain the torque wrench
- Store the torque wrench in a dry and secure location
- Verify the torque wrench calibration before each use
Frequently Asked Questions
Find answers to common questions about torque specifications
Q1 What IS the recommended tightening torque for the oil pan drain plug on a 2023 Lexus NX?
Q1
What IS the recommended tightening torque for the oil pan drain plug on a 2023 Lexus NX?
33 ft-lbs (45 Nm) + 90°
Q2 What IS the correct tool to use when torquing the spark plugs?
Q2
What IS the correct tool to use when torquing the spark plugs?
A 14mm deep socket and a torque wrench
Q3 How do I know if a bolt IS over-torqued?
Q3
How do I know if a bolt IS over-torqued?
Over-torqued bolts may exhibit visible signs of damage, such as stretched or snapped threads, deformed bolt head, or damaged surrounding components.
Q4 What are the consequences of using incorrect torque specifications?
Q4
What are the consequences of using incorrect torque specifications?
Improper torque can lead to insufficient clamping force, loose components, stripped threads, premature component failure, or increased risk of leaks and damage.
Q5 Can I use a standard wrench to tighten bolts?
Q5
Can I use a standard wrench to tighten bolts?
No, a torque wrench must be used for accurate torque application. Standard wrenches can provide an approximation, but they are not suitable for precise torque control.
Environmental Considerations
Temperature, humidity, and seasonal effects on torque specifications
Temperature Effects
Includes: High Heat, Cold Weather, Thermal Cycling
Temperature Effects
Includes: High Heat, Cold Weather, Thermal Cycling
Temperature can significantly impact torque values and fastener behavior
Cold Weather
Effects:
- Increased material brittleness
- Higher torque required due to thread contraction
- Reduced thread lubricant effectiveness
Recommendations:
- Allow components to warm to room temperature when possible
- Consider using winter-grade thread lubricants
- Check torque values more frequently during winter months
Hot Weather
Effects:
- Thermal expansion of components
- Decreased friction in threads
- Accelerated lubricant breakdown
Recommendations:
- Check torque when components are at normal operating temperature
- Use temperature-resistant thread lockers
- Consider re-torquing after heat cycles
Humidity and Corrosion
Covers: Rust Prevention, Salt Exposure, Moisture Control
Humidity and Corrosion
Covers: Rust Prevention, Salt Exposure, Moisture Control
Moisture and corrosion can affect fastener integrity and torque values
High Humidity
Effects:
- Accelerated corrosion formation
- Reduced friction coefficient
- Potential thread seizing
Prevention:
- Use corrosion-resistant fasteners
- Apply appropriate anti-seize compounds
- Maintain proper protective coatings
Salt Exposure
Effects:
- Rapid corrosion development
- Thread damage
- Seized fasteners
Prevention:
- Regular underbody washing
- Use of sacrificial anodes where appropriate
- Application of protective coatings
Seasonal Maintenance
Spring, Summer, Fall, and Winter maintenance schedules
Seasonal Maintenance
Spring, Summer, Fall, and Winter maintenance schedules
Spring
- Inspect for winter damage
- Clean and protect exposed fasteners
- Check torque on critical components
Summer
- Monitor heat-affected components
- Check expansion-related loosening
- Inspect cooling system mounts
Fall
- Prepare for winter conditions
- Apply corrosion protection
- Verify all fasteners are properly torqued
Winter
- More frequent inspection of critical fasteners
- Check for salt damage
- Monitor suspension component torque
Related Resources
Tools, service procedures, and technical bulletins
Recommended Tools
Digital Torque Wrench (10-100 Nm)
Essential for tightening fasteners to precise torque specifications, preventing damage and ensuring proper assembly. This range IS suitable for many applications on the NX.
- Digital display for accurate readings
- Audible alarm when target torque IS reached
- Multiple units (Nm, ft-lb, in-lb)
- Reversible ratcheting mechanism
Service Procedures
Technical Service Bulletins
Legal Disclaimer
Important information about using this content
Always refer to your vehicle's service manual and take appropriate safety precautions when performing any maintenance or repairs.
General Information
The information provided on this website is for general informational purposes only. While we strive to maintain accuracy in our content, all specifications, procedures, and technical information should be verified against your vehicle's official service manual or with the manufacturer directly.
Warranty & Liability
The content on this website is provided "as is" without any representations or warranties, express or implied. We make no representations or warranties regarding the accuracy, completeness, or availability of the information.
We shall not be liable for any direct, indirect, special, or consequential damages arising from the use of information on this website.
Technical Information
- All specifications, including torque values, fluid capacities, and maintenance procedures, should be verified against your vehicle's factory service manual.
- Vehicle specifications and procedures may vary by model year, trim level, and region.
- Always follow the manufacturer's recommended procedures and safety precautions.
- Working on vehicles can be dangerous. Always take proper safety precautions and use appropriate safety equipment.
- If you're unsure about any procedure, consult a qualified professional mechanic.
Intellectual Property
All content, including text, images, and specifications, is protected by copyright and other intellectual property laws. Any unauthorized use or reproduction is prohibited.
About the Author
Expert automotive knowledge and experience
'/%3E%3Cpath d='M60 30a20 20 0 1 1 0 40 20 20 0 0 1 0-40zm0 45c16.5 0 30 7.5 30 16.8V100H30v-8.2c0-9.3 13.5-16.8 30-16.8z' fill='%23404040'/%3E%3C/svg%3E)
ASE
15+ Years
Experience
500+ Guides
Guides
50+ Makes
Vehicles
1000+ Solutions
Solutions
Diagnostic
Specialized in advanced diagnostic techniques using modern scan tools and oscilloscopes.
Repair
Expert in both traditional mechanical repairs and modern vehicle systems.
Additional Expertise
Documentation
Created over 500 detailed repair guides and technical documents.
Training
Conducted technical training sessions and contributed to repair databases.
Certifications & Research
Certifications
- ASE Master Technician Certification
- Advanced Diagnostic Specialist
- Hybrid/Electric Vehicle Systems
- Performance Tuning Expert
Research & Community
Actively researches emerging technologies and contributes to automotive forums.