Lexus Vehicle Models GS 2005-2011 Torque Specifications
Lexus Vehicle Models GS 2005-2011

Lexus Vehicle Models GS 2005-2011 Torque Specifications

Complete Lexus Vehicle Models GS 2005-2011 torque specifications guide. Includes factory-specified torque values, torque sequences, and technical specifications for all components including body, brakes, drivetrain, electrical, emissions sensors, fuel, exhaust, HVAC, and suspension. Essential information for proper assembly and maintenance.

Updated

Important Information

Safety guidelines and reference information for proper torque application

Quick Reference Guide
ft-lbs → Nm
× 1.356
ft-lbs → kg-m
× 0.138
Nm → ft-lbs
× 0.738
in-lbs → ft-lbs
× 0.083

Common Torque Patterns

Star Pattern

Used for wheels and other circular bolt patterns

Star Pattern torque pattern diagram showing proper bolt tightening sequence
Cross Pattern

Used for gaskets and cover plates

Cross Pattern torque pattern diagram showing proper bolt tightening sequence
Sequential Pattern

Used for head bolts and other critical components

Sequential Pattern torque pattern diagram showing proper bolt tightening sequence

Common Mistakes to Avoid

Over-tightening

Exceeding the specified torque value can stretch or break fasteners, damage threads, or crack components.

Prevention:

Always use a calibrated torque wrench and follow specifications exactly.

Incorrect Torque Sequence

Tightening bolts in the wrong order can cause uneven pressure distribution and potential leaks or damage.

Prevention:

Follow the manufacturer's specified torque sequence pattern.

Dirty Threads

Dirt, rust, or old thread locker can affect torque readings and proper fastener tension.

Prevention:

Clean and inspect all threads before assembly. Use new thread locker if specified.

Reusing TTY Bolts

Torque-to-yield bolts are designed to stretch and must not be reused.

Prevention:

Always replace TTY bolts with new ones. They are single-use only.

Dry vs. Lubricated

Not accounting for whether torque specs are for dry or lubricated fasteners can lead to incorrect tension.

Prevention:

Check if specs are for dry or lubricated threads. Use specified lubricant when required.

Recommended Tools

Torque Wrench (1/4" Drive)

Range: 2-25 ft-lbs
Small fasteners, delicate components

Torque Wrench (3/8" Drive)

Range: 10-100 ft-lbs
Most common automotive fasteners

Torque Wrench (1/2" Drive)

Range: 30-250 ft-lbs
Large fasteners, wheels

Angle Gauge

Torque-to-yield (TTY) bolts

Torque Wrench Care

  • Calibrate annually or after 5,000 clicks
  • Store at lowest setting
  • Keep clean and lubricated

Search Specifications

Search by component name, bolt size, or description

Torque Calculator

Convert between different torque units

3.0l Engine

Torque specifications for 3.0L Engine

Cylinder Head and Valve Train

1

Cylinder Head Bolts

M12 x 1.5
Torque Specification
27 ft-lbs (36.6 N·m)
2

Valve Cover Bolts

M8 x 1.25
Torque Specification
5.5 ft-lbs (7.8 N·m)
Important Notes
Estimated value based on similar components.
3

Rocker Arms/Shafts Bolts

M10 x 1.5
Torque Specification
18 ft-lbs (24.4 N·m)

Engine Block and Crankshaft

1

Main Bearing Bolts

M14 x 2.0
Torque Specification
37 ft-lbs (50.1 N·m)
2

Connecting Rod Nuts

M12 x 1.5
Torque Specification
20 ft-lbs (27.1 N·m)
3

Crankshaft Pulley/Harmonic Balancer Bolt

M16 x 2.0
Torque Specification
181 ft-lbs (245.6 N·m)

Camshaft and Timing System

1

Camshaft Sprocket Bolt

M12 x 1.5
Torque Specification
48 ft-lbs (65.1 N·m)
2

Timing Belt/Chain Tensioner Bolt

M10 x 1.5
Torque Specification
25 ft-lbs (33.9 N·m)

Engine Accessories

1

Oil Pump Bolts

M10 x 1.5
Torque Specification
20 ft-lbs (27.1 N·m)
2

Water Pump Bolts

M8 x 1.25
Torque Specification
6.5 ft-lbs (9 N·m)
Important Notes
Estimated value based on similar components.
3

Thermostat Housing Bolts

M8 x 1.25
Torque Specification
9 ft-lbs (12.2 N·m)
Important Notes
Estimated value based on similar components.

Engine Mounts and Transmission

1

Engine Block to Transmission Bellhousing Bolts

M14 x 2.0
Torque Specification
40 ft-lbs (54.2 N·m)
2

Engine Mounting Bolts

M12 x 1.5
Torque Specification
40 ft-lbs (54.2 N·m)

Intake and Exhaust System

1

Intake Manifold Bolts

M10 x 1.5
Torque Specification
13 ft-lbs (17.6 N·m)
2

Exhaust Manifold/Headers Bolts

M12 x 1.5
Torque Specification
46 ft-lbs (62.4 N·m)

Ignition and Fuel System

1

Ignition Coil Bolt

M8 x 1.25
Torque Specification
5.2 ft-lbs (7.3 N·m)
Important Notes
Estimated value based on similar components.
2

Fuel Injector Bolts

M8 x 1.25
Torque Specification
5.2 ft-lbs (7.3 N·m)
Important Notes
Estimated value based on similar components.

3.0l V6 Engine

Torque specifications for 3.0L-V6 Engine

Cylinder Head and Valve Train

1

Cylinder Head Bolts

M12 x 1.5
Torque Specification
27 ft-lbs (36.6 N·m)
2

Valve Cover Bolts

M8 x 1.25
Torque Specification
5.5 ft-lbs (7.8 N·m)
Important Notes
Estimated value based on similar components.
3

Rocker Arms/Shafts Bolts

M10 x 1.5
Torque Specification
18 ft-lbs (24.4 N·m)

Engine Block and Crankshaft

1

Main Bearing Bolts

M14 x 2.0
Torque Specification
37 ft-lbs (50.1 N·m)
2

Connecting Rod Nuts

M12 x 1.5
Torque Specification
20 ft-lbs (27.1 N·m)
3

Crankshaft Pulley/Harmonic Balancer Bolt

M16 x 2.0
Torque Specification
181 ft-lbs (245.6 N·m)

Camshaft and Timing System

1

Camshaft Sprocket Bolt

M12 x 1.5
Torque Specification
48 ft-lbs (65.1 N·m)
2

Timing Belt/Chain Tensioner Bolt

M10 x 1.5
Torque Specification
25 ft-lbs (33.9 N·m)

Engine Accessories

1

Oil Pump Bolts

M10 x 1.5
Torque Specification
20 ft-lbs (27.1 N·m)
2

Water Pump Bolts

M8 x 1.25
Torque Specification
6.5 ft-lbs (9 N·m)
Important Notes
Estimated value based on similar components.
3

Thermostat Housing Bolts

M8 x 1.25
Torque Specification
9 ft-lbs (12.2 N·m)
Important Notes
Estimated value based on similar components.

Engine Mounts and Transmission

1

Engine Block to Transmission Bellhousing Bolts

M14 x 2.0
Torque Specification
40 ft-lbs (54.2 N·m)
2

Engine Mounting Bolts

M12 x 1.5
Torque Specification
40 ft-lbs (54.2 N·m)

Intake and Exhaust System

1

Intake Manifold Bolts

M10 x 1.5
Torque Specification
13 ft-lbs (17.6 N·m)
2

Exhaust Manifold/Headers Bolts

M12 x 1.5
Torque Specification
46 ft-lbs (62.4 N·m)

Ignition and Fuel System

1

Ignition Coil Bolt

M8 x 1.25
Torque Specification
5.2 ft-lbs (7.3 N·m)
Important Notes
Estimated value based on similar components.
2

Fuel Injector Bolts

M8 x 1.25
Torque Specification
5.2 ft-lbs (7.3 N·m)
Important Notes
Estimated value based on similar components.

3.5l Engine

Torque specifications for 3.5L Engine

Cylinder Head

1

Cylinder Head Bolts

M12 x 1.5
Torque Specification
27 ft-lbs (36.6 N·m)
Important Notes
Secure the cylinder head to the engine block.
2

Valve Cover Bolts

M8 x 1.25
Torque Specification
5.1 ft-lbs (7.8 N·m)
Important Notes
Secure the valve cover to the cylinder head.
3

Rocker Arms/Shafts Bolts

M10 x 1.5
Torque Specification
18 ft-lbs (24.4 N·m)
Important Notes
Secure the rocker arms and shafts to the cylinder head.

Engine Block

1

Main Bearing Bolts

M14 x 2.0
Torque Specification
37 ft-lbs (50.1 N·m)
Important Notes
Secure the main bearings in the engine block.
2

Connecting Rod Nuts

M12 x 1.75
Torque Specification
20 ft-lbs (27.1 N·m)
Important Notes
Secure the connecting rods to the crankshaft.

Camshaft

1

Camshaft Sprocket Bolt

M16 x 2.0
Torque Specification
48 ft-lbs (65.1 N·m)
Important Notes
Secure the camshaft sprocket to the camshaft.
2

Timing Belt/Chain Tensioner Bolt

M10 x 1.5
Torque Specification
25 ft-lbs (33.9 N·m)
Important Notes
Secure the timing belt/chain tensioner to the engine block.

Crankshaft

1

Crankshaft Pulley/Harmonic Balancer Bolt

M18 x 2.5
Torque Specification
181 ft-lbs (245.6 N·m)
Important Notes
Secure the crankshaft pulley and harmonic balancer to the crankshaft.

Oil Pan

1

Oil Pan Bolts

M10 x 1.5
Torque Specification
5.1 ft-lbs (7.8 N·m)
Important Notes
Secure the oil pan to the engine block.

Exhaust System

1

Exhaust Manifold/Headers Bolts

M12 x 1.75
Torque Specification
46 ft-lbs (62.4 N·m)
Important Notes
Secure the exhaust manifold/header to the cylinder head.

Fuel System

1

Fuel Injector Bolts

M8 x 1.25
Torque Specification
4.8 ft-lbs (7.3 N·m)
Important Notes
Secure the fuel injectors to the intake manifold.

Ignition System

1

Spark Plugs

14mm x 1.25
Torque Specification
15 ft-lbs (20.3 N·m)
Important Notes
Secure the spark plugs in the engine's cylinder head.

3.5l V6 Engine

Torque specifications for 3.5L-V6 Engine

Cylinder Head

1

Cylinder Head Bolts

M12 x 1.5
Torque Specification
27 ft-lbs (36.6 N·m)
Important Notes
Secure the cylinder head to the engine block.
2

Valve Cover Bolts

M8 x 1.25
Torque Specification
5.1 ft-lbs (7.8 N·m)
Important Notes
Secure the valve cover to the cylinder head.
3

Rocker Arms/Shafts Bolts

M10 x 1.5
Torque Specification
18 ft-lbs (24.4 N·m)
Important Notes
Secure the rocker arms and shafts to the cylinder head.

Engine Block

1

Main Bearing Bolts

M14 x 2.0
Torque Specification
37 ft-lbs (50.1 N·m)
Important Notes
Secure the main bearings in the engine block.
2

Connecting Rod Nuts

M12 x 1.75
Torque Specification
20 ft-lbs (27.1 N·m)
Important Notes
Secure the connecting rods to the crankshaft.

Camshaft

1

Camshaft Sprocket Bolt

M16 x 2.0
Torque Specification
48 ft-lbs (65.1 N·m)
Important Notes
Secure the camshaft sprocket to the camshaft.
2

Timing Belt/Chain Tensioner Bolt

M10 x 1.5
Torque Specification
25 ft-lbs (33.9 N·m)
Important Notes
Secure the timing belt/chain tensioner to the engine block.

Crankshaft

1

Crankshaft Pulley/Harmonic Balancer Bolt

M18 x 2.5
Torque Specification
181 ft-lbs (245.6 N·m)
Important Notes
Secure the crankshaft pulley and harmonic balancer to the crankshaft.

Oil Pan

1

Oil Pan Bolts

M10 x 1.5
Torque Specification
5.1 ft-lbs (7.8 N·m)
Important Notes
Secure the oil pan to the engine block.

Exhaust System

1

Exhaust Manifold/Headers Bolts

M12 x 1.75
Torque Specification
46 ft-lbs (62.4 N·m)
Important Notes
Secure the exhaust manifold/header to the cylinder head.

Fuel System

1

Fuel Injector Bolts

M8 x 1.25
Torque Specification
4.8 ft-lbs (7.3 N·m)
Important Notes
Secure the fuel injectors to the intake manifold.

Ignition System

1

Spark Plugs

14mm x 1.25
Torque Specification
15 ft-lbs (20.3 N·m)
Important Notes
Secure the spark plugs in the engine's cylinder head.

4.3l Engine

Torque specifications for 4.3L Engine

Cylinder Head and Engine Block

1

Cylinder Head Bolts

M12 x 1.5
Torque Specification
27 ft-lbs (36.6 N·m)
Important Notes
These bolts secure the cylinder head to the engine block, ensuring proper sealing and preventing coolant and oil leaks.
2

Cylinder Head to Engine Block Studs

M14 x 1.5
Torque Specification
30 ft-lbs (40.7 N·m)
Important Notes
These studs secure the cylinder head to the engine block, ensuring proper sealing and preventing coolant and oil leaks. (Estimated value)

Main Bearings and Crankshaft

1

Main Bearing Bolts

M16 x 1.5
Torque Specification
37 ft-lbs (50.1 N·m)
Important Notes
These bolts hold the main bearings in place, supporting the crankshaft and maintaining engine stability.
2

Crankshaft Pulley/Harmonic Balancer Bolt

M20 x 1.5
Torque Specification
181 ft-lbs (245.6 N·m)
Important Notes
This bolt secures the crankshaft pulley or harmonic balancer, providing a smooth surface for the serpentine belt and maintaining engine balance.

Camshaft and Valve Train

1

Camshaft Sprocket Bolt

M14 x 1.5
Torque Specification
48 ft-lbs (65.1 N·m)
Important Notes
This bolt attaches the camshaft sprocket to the camshaft, driving the engine's valve train.
2

Rocker Arms/Shafts Bolts

M10 x 1.5
Torque Specification
18 ft-lbs (24.4 N·m)
Important Notes
These bolts secure the rocker arms or shafts to the engine block, driving the engine's valve train.

Intake and Exhaust Manifolds

1

Intake Manifold Bolts

M10 x 1.5
Torque Specification
13 ft-lbs (17.6 N·m)
Important Notes
These bolts secure the intake manifold to the engine block, providing a smooth surface for airflow and fuel delivery.
2

Exhaust Manifold/Headers Bolts

M12 x 1.5
Torque Specification
46 ft-lbs (62.4 N·m)
Important Notes
These bolts attach the exhaust manifold or headers to the engine block, ensuring proper exhaust gas flow and engine performance.

Fuel System

1

Fuel Injector Bolts

M8 x 1.25
Torque Specification
65 in-lbs (7.3 N·m)
Important Notes
These bolts attach the fuel injectors to the intake manifold, ensuring proper fuel delivery and engine performance.
2

Fuel Rail Bolts

M10 x 1.5
Torque Specification
13 ft-lbs (17.6 N·m)
Important Notes
These bolts secure the fuel rail to the intake manifold, providing a smooth surface for fuel delivery.

Oil System

1

Oil Pan Bolts

M10 x 1.5
Torque Specification
69 in-lbs (7.8 N·m)
Important Notes
These bolts secure the oil pan to the engine block, preventing oil leaks and ensuring proper engine lubrication.
2

Oil Filter Housing Bolt

M10 x 1.5
Torque Specification
13 ft-lbs (17.6 N·m)
Important Notes
This bolt secures the oil filter housing to the engine block, ensuring proper oil filtration and engine lubrication.

Engine Mounts and Transmission

1

Engine Block to Transmission Mounting Bolts

M14 x 1.5
Torque Specification
40 ft-lbs (54.2 N·m)
Important Notes
These bolts secure the engine block to the transmission mount, ensuring proper engine alignment and preventing vibration. (Estimated value)
2

Engine Mounting Bolts

M12 x 1.5
Torque Specification
40 ft-lbs (54.2 N·m)
Important Notes
These bolts secure the engine to the engine mounts, ensuring proper engine alignment and preventing vibration. (Estimated value)

4.3l V8 Engine

Torque specifications for 4.3L-V8 Engine

Cylinder Head and Engine Block

1

Cylinder Head Bolts

M12 x 1.5
Torque Specification
27 ft-lbs (36.6 N·m)
Important Notes
These bolts secure the cylinder head to the engine block, ensuring proper sealing and preventing coolant and oil leaks.
2

Cylinder Head to Engine Block Studs

M14 x 1.5
Torque Specification
30 ft-lbs (40.7 N·m)
Important Notes
These studs secure the cylinder head to the engine block, ensuring proper sealing and preventing coolant and oil leaks. (Estimated value)

Main Bearings and Crankshaft

1

Main Bearing Bolts

M16 x 1.5
Torque Specification
37 ft-lbs (50.1 N·m)
Important Notes
These bolts hold the main bearings in place, supporting the crankshaft and maintaining engine stability.
2

Crankshaft Pulley/Harmonic Balancer Bolt

M20 x 1.5
Torque Specification
181 ft-lbs (245.6 N·m)
Important Notes
This bolt secures the crankshaft pulley or harmonic balancer, providing a smooth surface for the serpentine belt and maintaining engine balance.

Camshaft and Valve Train

1

Camshaft Sprocket Bolt

M14 x 1.5
Torque Specification
48 ft-lbs (65.1 N·m)
Important Notes
This bolt attaches the camshaft sprocket to the camshaft, driving the engine's valve train.
2

Rocker Arms/Shafts Bolts

M10 x 1.5
Torque Specification
18 ft-lbs (24.4 N·m)
Important Notes
These bolts secure the rocker arms or shafts to the engine block, driving the engine's valve train.

Intake and Exhaust Manifolds

1

Intake Manifold Bolts

M10 x 1.5
Torque Specification
13 ft-lbs (17.6 N·m)
Important Notes
These bolts secure the intake manifold to the engine block, providing a smooth surface for airflow and fuel delivery.
2

Exhaust Manifold/Headers Bolts

M12 x 1.5
Torque Specification
46 ft-lbs (62.4 N·m)
Important Notes
These bolts attach the exhaust manifold or headers to the engine block, ensuring proper exhaust gas flow and engine performance.

Fuel System

1

Fuel Injector Bolts

M8 x 1.25
Torque Specification
65 in-lbs (7.3 N·m)
Important Notes
These bolts attach the fuel injectors to the intake manifold, ensuring proper fuel delivery and engine performance.
2

Fuel Rail Bolts

M10 x 1.5
Torque Specification
13 ft-lbs (17.6 N·m)
Important Notes
These bolts secure the fuel rail to the intake manifold, providing a smooth surface for fuel delivery.

Oil System

1

Oil Pan Bolts

M10 x 1.5
Torque Specification
69 in-lbs (7.8 N·m)
Important Notes
These bolts secure the oil pan to the engine block, preventing oil leaks and ensuring proper engine lubrication.
2

Oil Filter Housing Bolt

M10 x 1.5
Torque Specification
13 ft-lbs (17.6 N·m)
Important Notes
This bolt secures the oil filter housing to the engine block, ensuring proper oil filtration and engine lubrication.

Engine Mounts and Transmission

1

Engine Block to Transmission Mounting Bolts

M14 x 1.5
Torque Specification
40 ft-lbs (54.2 N·m)
Important Notes
These bolts secure the engine block to the transmission mount, ensuring proper engine alignment and preventing vibration. (Estimated value)
2

Engine Mounting Bolts

M12 x 1.5
Torque Specification
40 ft-lbs (54.2 N·m)
Important Notes
These bolts secure the engine to the engine mounts, ensuring proper engine alignment and preventing vibration. (Estimated value)

4.6l Engine

Torque specifications for 4.6L Engine

Cylinder Head and Engine Block

1

Cylinder Head Bolts

M12 x 1.5
Torque Specification
27 ft-lbs (36.6 N·m)
2

Main Bearing Bolts

M14 x 1.5
Torque Specification
37 ft-lbs (50.1 N·m)

Connecting Rods and Crankshaft

1

Connecting Rod Nuts

M10 x 1.5
Torque Specification
20 ft-lbs (27.1 N·m)

Flywheel and Transmission

1

Flywheel Bolts

M14 x 1.5
Torque Specification
61 ft-lbs (82.8 N·m)

Oil Pan and Engine Block

1

Oil Pan Bolts

M8 x 1.25
Torque Specification
69 inch-lbs (7.8 N·m)

Valve Train and Cylinder Head

1

Valve Cover Bolts

M8 x 1.25
Torque Specification
69 inch-lbs (7.8 N·m)

Timing Belt/Chain and Tensioner

1

Timing Belt/Chain Tensioner Bolt

M10 x 1.5
Torque Specification
25 ft-lbs (33.9 N·m)

Camshaft and Sprocket

1

Camshaft Sprocket Bolt

M12 x 1.5
Torque Specification
48 ft-lbs (65.1 N·m)

Crankshaft Pulley/Harmonic Balancer

1

Crankshaft Pulley/Harmonic Balancer Bolt

M14 x 1.5
Torque Specification
181 ft-lbs (245.6 N·m)

Throttle Body and Intake Manifold

1

Throttle Body Bolts

M8 x 1.25
Torque Specification
13 ft-lbs (17.6 N·m)

Exhaust Manifold/Headers

1

Exhaust Manifold/Headers Bolts

M10 x 1.5
Torque Specification
46 ft-lbs (62.4 N·m)

Spark Plugs

1

Spark Plugs

M14 x 1.25
Torque Specification
15 ft-lbs (20.3 N·m)

Rocker Arms/Shafts

1

Rocker Arms/Shafts Bolts

M10 x 1.5
Torque Specification
18 ft-lbs (24.4 N·m)

Fuel Injectors and Fuel Rail

1

Fuel Injector Bolts

M8 x 1.25
Torque Specification
65 inch-lbs (7.3 N·m)

Oil Filter Housing

1

Oil Filter Housing Bolt

M10 x 1.5
Torque Specification
13 ft-lbs (17.6 N·m)

Oil Drain Plug

1

Oil Drain Plug Bolt

M12 x 1.5
Torque Specification
29 ft-lbs (39.4 N·m)

4.6l V8 Engine

Torque specifications for 4.6L-V8 Engine

Cylinder Head and Engine Block

1

Cylinder Head Bolts

M12 x 1.5
Torque Specification
27 ft-lbs (36.6 N·m)
2

Main Bearing Bolts

M14 x 1.5
Torque Specification
37 ft-lbs (50.1 N·m)

Connecting Rods and Crankshaft

1

Connecting Rod Nuts

M10 x 1.5
Torque Specification
20 ft-lbs (27.1 N·m)

Flywheel and Transmission

1

Flywheel Bolts

M14 x 1.5
Torque Specification
61 ft-lbs (82.8 N·m)

Oil Pan and Engine Block

1

Oil Pan Bolts

M8 x 1.25
Torque Specification
69 inch-lbs (7.8 N·m)

Valve Train and Cylinder Head

1

Valve Cover Bolts

M8 x 1.25
Torque Specification
69 inch-lbs (7.8 N·m)

Timing Belt/Chain and Tensioner

1

Timing Belt/Chain Tensioner Bolt

M10 x 1.5
Torque Specification
25 ft-lbs (33.9 N·m)

Camshaft and Sprocket

1

Camshaft Sprocket Bolt

M12 x 1.5
Torque Specification
48 ft-lbs (65.1 N·m)

Crankshaft Pulley/Harmonic Balancer

1

Crankshaft Pulley/Harmonic Balancer Bolt

M14 x 1.5
Torque Specification
181 ft-lbs (245.6 N·m)

Throttle Body and Intake Manifold

1

Throttle Body Bolts

M8 x 1.25
Torque Specification
13 ft-lbs (17.6 N·m)

Exhaust Manifold/Headers

1

Exhaust Manifold/Headers Bolts

M10 x 1.5
Torque Specification
46 ft-lbs (62.4 N·m)

Spark Plugs

1

Spark Plugs

M14 x 1.25
Torque Specification
15 ft-lbs (20.3 N·m)

Rocker Arms/Shafts

1

Rocker Arms/Shafts Bolts

M10 x 1.5
Torque Specification
18 ft-lbs (24.4 N·m)

Fuel Injectors and Fuel Rail

1

Fuel Injector Bolts

M8 x 1.25
Torque Specification
65 inch-lbs (7.3 N·m)

Oil Filter Housing

1

Oil Filter Housing Bolt

M10 x 1.5
Torque Specification
13 ft-lbs (17.6 N·m)

Oil Drain Plug

1

Oil Drain Plug Bolt

M12 x 1.5
Torque Specification
29 ft-lbs (39.4 N·m)

A760 Transmission

Torque specifications for A760 Transmission

Transmission Mounting

1

Transmission Mounting Bolts

M14 x 1.5
Torque Specification
47 ft-lbs (63.7 N·m)

Transmission Oil Pan

1

Transmission Oil Pan Bolts

M10 x 1.25
Torque Specification
5.7 ft-lbs (7.8 N·m)

Transmission Fluid Drain and Fill

1

Transmission Drain and Fill Plugs

M12 x 1.5
Torque Specification
36 ft-lbs (48.9 N·m)
2

Transmission Fluid Drain/Fill Plug

M12 x 1.5
Torque Specification
29 ft-lbs (39.4 N·m)

Transmission Case

1

Transmission Case Bolts

M14 x 1.5
Torque Specification
45 ft-lbs (61 N·m)
Important Notes
Estimated value based on industry standards for similar transmission designs.

Valve Body

1

Valve Body Bolts

M10 x 1.25
Torque Specification
22.5 ft-lbs (30.5 N·m)
Important Notes
Estimated value based on industry standards for similar transmission designs.

Torque Converter

1

Torque Converter Bolts

M12 x 1.5
Torque Specification
35 ft-lbs (47.5 N·m)
Important Notes
Estimated value based on industry standards for similar transmission designs.

Transmission Cooler Lines

1

Transmission Cooler Line Fittings

M10 x 1.25
Torque Specification
17.5 ft-lbs (23.7 N·m)
Important Notes
Estimated value based on industry standards for similar transmission designs.

A960e Transmission

Torque specifications for A960e Transmission

Transmission Mounting

1

Transmission Mounting Bolts

M10 x 1.5
Torque Specification
47 ft-lbs (63.7 N·m)
Important Notes
Ensure the transmission is properly aligned before applying torque.

Transmission Fluid Management

1

Transmission Oil Pan Bolts

M8 x 1.25
Torque Specification
69 inch-lbs (7.8 N·m)
Important Notes
Ensure the oil pan is properly seated before applying torque.
2

Transmission Drain and Fill Plugs

M12 x 1.75
Torque Specification
36 ft-lbs (48.9 N·m)
Important Notes
Ensure the plugs are properly sealed to prevent fluid leaks.
3

Transmission Fluid Filter Bolt/Nut

M10 x 1.5
Torque Specification
22 ft-lbs (29.9 N·m)
Important Notes
Estimated value based on similar components.

Transmission Drive Components

1

Drive Axle/Half Shaft Bolts

M12 x 1.75
Torque Specification
47 ft-lbs (63.7 N·m)
Important Notes
Ensure the axle is properly aligned before applying torque.
2

CV Joint/Axle Nut

M14 x 1.5
Torque Specification
159 ft-lbs (215.7 N·m)
Important Notes
Ensure the CV joint is properly seated before applying torque.
3

Propeller/Drive Shaft Bolts

M12 x 1.75
Torque Specification
55 ft-lbs (74.6 N·m)
Important Notes
Ensure the drive shaft is properly aligned before applying torque.

Transmission Housing

1

Transmission Housing Bolts

M10 x 1.5
Torque Specification
47 ft-lbs (63.7 N·m)
Important Notes
Estimated value based on similar components.

Transmission Shift Mechanism

1

Transmission Shift Linkage Bolts

M8 x 1.25
Torque Specification
29 ft-lbs (39.4 N·m)
Important Notes
Estimated value based on similar components.

Body

Torque specifications for Body

Suspension

1

Strut/Shock Absorber Mounting Bolts

M14 x 1.5
Torque Specification
95 ft-lbs (128.8 N·m)
2

Control Arm Bolts

M12 x 1.25
Torque Specification
74 ft-lbs (100.3 N·m)
3

Ball Joint Nut

M16 x 1.5
Torque Specification
65 ft-lbs (88.1 N·m)
4

Tie Rod End Nut

M10 x 1.25
Torque Specification
36 ft-lbs (48.9 N·m)
5

Sway Bar Link Nut

M8 x 1.25
Torque Specification
25 ft-lbs (33.9 N·m)

Steering

1

Steering Gear/Rack Bolts

M14 x 1.5
Torque Specification
76 ft-lbs (103 N·m)

Body

1

Body Mount Bolts

M12 x 1.25
Torque Specification
45 ft-lbs (61 N·m)
Important Notes
Estimated value, may vary depending on location and type of body mount.
2

Fender Bolts

M8 x 1.25
Torque Specification
17.5 ft-lbs (23.7 N·m)
Important Notes
Estimated value, may vary depending on location and type of fender bolt.
3

Hood Hinge Bolts

M6 x 1.0
Torque Specification
17.5 ft-lbs (23.7 N·m)
Important Notes
Estimated value, may vary depending on location and type of hood hinge bolt.
4

Trunk Lid Hinge Bolts

M6 x 1.0
Torque Specification
17.5 ft-lbs (23.7 N·m)
Important Notes
Estimated value, may vary depending on location and type of trunk lid hinge bolt.
5

Door Hinge Bolts

M6 x 1.0
Torque Specification
17.5 ft-lbs (23.7 N·m)
Important Notes
Estimated value, may vary depending on location and type of door hinge bolt.

Brakes

Torque specifications for Brakes

Brake Caliper System

1

Brake Caliper Bolts

M10 x 1.5
Torque Specification
74 ft-lbs (100.3 N·m)
Important Notes
Ensure caliper remains securely attached to prevent movement or misalignment.
2

Brake Caliper Mounting Bracket Bolts

M12 x 1.5
Torque Specification
80 ft-lbs (108.5 N·m)
Important Notes
Critical for maintaining structural integrity and caliper alignment.

Brake Rotor System

1

Brake Disc/Drum Retaining Bolts

M8 x 1.25
Torque Specification
55 ft-lbs (74.6 N·m)
Important Notes
Ensure rotor remains securely fastened to prevent vibration or uneven wear.

Wheel Attachment System

1

Wheel Lug Nuts

M14 x 1.5
Torque Specification
76 ft-lbs (103 N·m)
Important Notes
Critical for maintaining wheel attachment and brake performance.

Brake Hydraulic System

1

Brake Hose Banjo Bolt

M8 x 1.25
Torque Specification
22 ft-lbs (29.9 N·m)
Important Notes
Ensure leak-free connection for maintaining hydraulic pressure.
2

Brake Master Cylinder Mounting Bolts

M6 x 1.0
Torque Specification
13 ft-lbs (17.6 N·m)
Important Notes
Estimated value based on similar components and bolt sizes.
3

Brake Booster Mounting Bolts

M6 x 1.0
Torque Specification
18 ft-lbs (24.4 N·m)
Important Notes
Estimated value based on similar components and bolt sizes.

Brake Pedal System

1

Brake Pedal Pivot Bolt

M6 x 1.0
Torque Specification
18 ft-lbs (24.4 N·m)
Important Notes
Estimated value based on similar components and bolt sizes.

Abs Sensor System

1

ABS Sensor Mounting Bolts

M5 x 0.8
Torque Specification
7 ft-lbs (9.5 N·m)
Important Notes
Estimated value based on similar components and bolt sizes.

Drivetrain

Torque specifications for Drivetrain

Engine and Transmission Interface

1

Engine Block to Transmission Bellhousing Bolts

M14 x 1.5
Torque Specification
55 ft-lbs (74.6 N·m)
Important Notes
Estimated value, consult vehicle manufacturer's repair manual for correct torque value.
2

Transmission Crossmember Bolts

M12 x 1.25
Torque Specification
45 ft-lbs (61 N·m)
Important Notes
Estimated value, consult vehicle manufacturer's repair manual for correct torque value.

Transmission and Drivetrain

1

Flywheel Bolts

M10 x 1.25
Torque Specification
61 ft-lbs (82.8 N·m)
2

Transmission Mounting Bolts

M12 x 1.25
Torque Specification
47 ft-lbs (63.7 N·m)
3

Transmission Oil Pan Bolts

M8 x 1.25
Torque Specification
69 in-lbs (7.8 N·m)
4

Drive Axle/Half Shaft Bolts

M14 x 1.5
Torque Specification
47 ft-lbs (63.7 N·m)
5

CV Joint/Axle Nut

M20 x 1.5
Torque Specification
159 ft-lbs (215.7 N·m)
6

Propeller/Drive Shaft Bolts

M12 x 1.25
Torque Specification
55 ft-lbs (74.6 N·m)

Differential and Transfer Case

1

Differential Cover Bolts

M10 x 1.25
Torque Specification
35 ft-lbs (47.5 N·m)
Important Notes
Estimated value, consult vehicle manufacturer's repair manual for correct torque value.
2

Transfer Case Mounting Bolts

M12 x 1.25
Torque Specification
45 ft-lbs (61 N·m)
Important Notes
Estimated value, consult vehicle manufacturer's repair manual for correct torque value.
3

Differential Drain/Fill Plug

M12 x 1.25
Torque Specification
29 ft-lbs (39.4 N·m)
4

Transfer Case Drain/Fill Plug

M12 x 1.25
Torque Specification
29 ft-lbs (39.4 N·m)

Electrical

Torque specifications for Electrical

Battery and Charging System

1

Battery Terminal Nuts

M8 x 1.25
Torque Specification
6 ft-lbs (6 N·m)
Important Notes
Estimated bolt size. Torque value is in inch-lbs, converted to ft-lbs and N·m.
2

Alternator Mounting Bolts

M12 x 1.5
Torque Specification
29 ft-lbs (39.4 N·m)
3

Starter Motor Mounting Bolts

M12 x 1.5
Torque Specification
29 ft-lbs (39.4 N·m)

Ignition System

1

Ignition Coil Mounting Bolts

M8 x 1.25
Torque Specification
1. 10 ft-lbs (13.6 N·m) 2. 15 ft-lbs (20.3 N·m)
Important Notes
Estimated bolt size. Torque value range is based on general guidelines.
2

Spark Plug Wire Boots

M6 x 1.0
Torque Specification
1. 1.1 ft-lbs (1.1 N·m) 2. 1.7 ft-lbs (1.7 N·m)
Important Notes
Estimated bolt size. Torque value range is based on general guidelines.

Grounding System

1

Ground Strap Bolts

M10 x 1.5
Torque Specification
1. 10 ft-lbs (13.6 N·m) 2. 15 ft-lbs (20.3 N·m)
Important Notes
Estimated bolt size. Torque value range is based on general guidelines.

Emissions Sensors

Torque specifications for Emissions_sensors

Egr Valve

1

EGR Valve Bolts

M10 x 1.25
Torque Specification
13 ft-lbs (17.6 N·m)
Important Notes
Ensure the valve is properly aligned before applying torque.

Exhaust Manifold

1

Exhaust Manifold/Headers Bolts

M12 x 1.5
Torque Specification
46 ft-lbs (62.4 N·m)
Important Notes
Ensure the manifold is properly aligned before applying torque.
2

Exhaust Manifold/Headers to Cylinder Head Bolts

M10 x 1.25
Torque Specification
27 ft-lbs (36.6 N·m)
Important Notes
Ensure the manifold is properly aligned before applying torque.

Exhaust Pipe

1

Exhaust Pipe to Exhaust Manifold/Headers Bolts

M12 x 1.5
Torque Specification
46 ft-lbs (62.4 N·m)
Important Notes
Ensure the pipe is properly aligned before applying torque.
2

Catalytic Converter to Exhaust Pipe Bolts

M10 x 1.25
Torque Specification
33 ft-lbs (44.7 N·m)
Important Notes
Ensure the converter is properly aligned before applying torque.
3

Muffler to Exhaust Pipe Bolts

M10 x 1.25
Torque Specification
33 ft-lbs (44.7 N·m)
Important Notes
Ensure the muffler is properly aligned before applying torque.

Emissions Sensors

1

Oxygen Sensor (O2 Sensor) Mounting Bolts

M8 x 1.25
Torque Specification
30 ft-lbs (40.7 N·m)
Important Notes
Ensure the sensor is properly aligned before applying torque.
2

Catalytic Converter Heat Shield Bolts

M6 x 1.0
Torque Specification
18 ft-lbs (24.4 N·m)
Important Notes
Ensure the heat shield is properly aligned before applying torque.
3

Exhaust Gas Temperature Sensor Bolts

M6 x 1.0
Torque Specification
15 ft-lbs (20.3 N·m)
Important Notes
Ensure the sensor is properly aligned before applying torque.
4

DPF (Diesel Particulate Filter) Mounting Bolts

M10 x 1.25
Torque Specification
37 ft-lbs (50.1 N·m)
Important Notes
Estimated value based on similar components. Ensure the filter is properly aligned before applying torque.

Exhaust

Torque specifications for Exhaust

Exhaust Manifold and Headers

1

Exhaust Manifold/Headers to Engine Block Bolts

M12 x 1.5
Torque Specification
46 ft-lbs (62.4 N·m)
2

Exhaust Manifold/Headers to Cylinder Head Bolts

M10 x 1.25
Torque Specification
27 ft-lbs (36.6 N·m)

Exhaust Pipe and Connections

1

Exhaust Pipe to Exhaust Manifold/Headers Bolts

M12 x 1.5
Torque Specification
46 ft-lbs (62.4 N·m)
2

Catalytic Converter to Exhaust Pipe Bolts

M10 x 1.25
Torque Specification
33 ft-lbs (44.7 N·m)
3

Muffler to Exhaust Pipe Bolts

M10 x 1.25
Torque Specification
33 ft-lbs (44.7 N·m)

Oxygen Sensor and Heat Shield

1

Oxygen Sensor Bolts

M8 x 1.25
Torque Specification
22.5 ft-lbs (30.5 N·m)
Important Notes
Estimated value. Consult manufacturer's recommendations for specific torque values.
2

Heat Shield Bolts

M6 x 1.0
Torque Specification
12.5 ft-lbs (17 N·m)
Important Notes
Estimated value. Consult manufacturer's recommendations for specific torque values.

Exhaust System Mounting

1

Exhaust System Mounting Bolts

M10 x 1.25
Torque Specification
25 ft-lbs (33.9 N·m)
Important Notes
Estimated value. Consult manufacturer's recommendations for specific torque values.

Exhaust Pipe Flange

1

Exhaust Pipe Flange Bolts

M12 x 1.5
Torque Specification
35 ft-lbs (47.4 N·m)
Important Notes
Estimated value. Consult manufacturer's recommendations for specific torque values.

Fuel

Torque specifications for Fuel

Fuel Rail and Injector System

1

Fuel Rail Bolts

M12 x 1.5
Torque Specification
13 ft-lbs (17.6 N·m)
2

Fuel Injector Bolts

M8 x 1.25
Torque Specification
5.4 ft-lbs (7.3 N·m)
Important Notes
Estimated bolt size based on similar components.
3

Fuel Injector Rail Bolts

M12 x 1.5
Torque Specification
13 ft-lbs (17.6 N·m)

Fuel Pump and Tank System

1

Fuel Pump Mounting Bolts

M14 x 2.0
Torque Specification
29 ft-lbs (39.4 N·m)
2

Fuel Tank Strap Bolts

M14 x 2.0
Torque Specification
29 ft-lbs (39.4 N·m)

Fuel Filter and Filler System

1

Fuel Filter Bolt/Nut

M16 x 1.5
Torque Specification
22 ft-lbs (29.9 N·m)
2

Fuel Filler Neck Bolts

M10 x 1.25
Torque Specification
3 ft-lbs (4.1 N·m)
Important Notes
Estimated bolt size based on similar components.

Fuel Pressure Regulator and Vent System

1

Fuel Pressure Regulator Mounting Bolts

M10 x 1.25
Torque Specification
1. 10 ft-lbs (13.6 N·m) 2. 15 ft-lbs (20.3 N·m)
Important Notes
Estimated torque values based on similar components.
2

Fuel Tank Vent Valve Bolts

M10 x 1.25
Torque Specification
1. 10 ft-lbs (13.6 N·m) 2. 15 ft-lbs (20.3 N·m)
Important Notes
Estimated torque values based on similar components.
3

Fuel Line Fittings

M12 x 1.5
Torque Specification
1. 10 ft-lbs (13.6 N·m) 2. 15 ft-lbs (20.3 N·m)
Important Notes
Estimated torque values based on similar components.

Hvac

Torque specifications for Hvac

Ac Compressor

1

A/C Compressor Mounting Bolts

M10 x 1.25
Torque Specification
29 ft-lbs (39.4 N·m)
Important Notes
Ensure bolts are tightened in a crisscross pattern to evenly distribute load.

Ac Lines

1

A/C Line Fittings

M8 x 1.0
Torque Specification
15 ft-lbs (20.3 N·m)
Important Notes
Use a torque wrench to avoid over-tightening, which can damage O-rings or fittings.

Evaporator Core

1

Evaporator Core Housing Bolts

M6 x 1.0
Torque Specification
5.75 ft-lbs (7.8 N·m)
Important Notes
Estimated value based on typical M6 bolt torque for HVAC housings.

Blower Motor

1

Blower Motor Mounting Bolts

M6 x 1.0
Torque Specification
5.75 ft-lbs (7.8 N·m)
Important Notes
Estimated value based on typical M6 bolt torque for motor mounts.

Heater Core

1

Heater Core Inlet/Outlet Pipe Bolts

M8 x 1.25
Torque Specification
13 ft-lbs (17.6 N·m)
Important Notes
Ensure O-rings are properly seated before tightening.

Hvac Case

1

HVAC Case Assembly Bolts

M6 x 1.0
Torque Specification
5.75 ft-lbs (7.8 N·m)
Important Notes
Estimated value based on typical M6 bolt torque for HVAC cases.

Condenser

1

Condenser Mounting Bolts

M10 x 1.25
Torque Specification
29 ft-lbs (39.4 N·m)
Important Notes
Ensure bolts are tightened in a crisscross pattern to evenly distribute load.

Suspension

Torque specifications for Suspension

Front Suspension

1

Strut/Shock Absorber Mounting Bolts

M14 x 1.5
Torque Specification
95 ft-lbs (128.8 N·m)
2

Control Arm Bolts

M12 x 1.25
Torque Specification
74 ft-lbs (100.3 N·m)
3

Ball Joint Nut

M16 x 1.5
Torque Specification
65 ft-lbs (88.1 N·m)
4

Tie Rod End Nut

M10 x 1.25
Torque Specification
36 ft-lbs (48.9 N·m)
5

Sway Bar Link Nut

M8 x 1.25
Torque Specification
25 ft-lbs (33.9 N·m)
6

Upper Control Arm Bushing Bolts

M10 x 1.25
Torque Specification
45 ft-lbs (61 N·m)
Important Notes
Estimated value based on industry standards for similar applications.
7

Lower Control Arm Bolts

M12 x 1.25
Torque Specification
65 ft-lbs (88.1 N·m)
Important Notes
Estimated value based on industry standards for similar applications.

Steering System

1

Steering Gear Mounting Bolts

M14 x 1.5
Torque Specification
75 ft-lbs (101.7 N·m)
Important Notes
Estimated value based on industry standards for similar applications.

Suspension Springs

1

Coil Spring Mounting Bolts

M10 x 1.25
Torque Specification
35 ft-lbs (47.4 N·m)
Important Notes
Estimated value based on industry standards for similar applications.

Troubleshooting Guide

Common issues, diagnostic steps, and prevention guidelines

Common Issues

Bolt stretching, stripped threads, uneven torque patterns

Loose Components

Symptoms:
  • Rattling or vibration noises
  • Visible movement in components
  • Uneven panel gaps
Solutions:
  • Clean threads and mounting surfaces
  • Replace damaged fasteners
  • Apply proper torque in sequence
  • Use thread locker if specified

Stripped Fasteners

Symptoms:
  • Unable to achieve proper torque
  • Fastener spins freely
  • Visible thread damage
Solutions:
  • Use thread repair kit if appropriate
  • Install thread insert (HeliCoil)
  • Replace component if threaded hole is damaged
  • Upgrade to higher grade fastener if recommended

Overtightened Components

Symptoms:
  • Cracked or deformed parts
  • Broken fasteners
  • Compressed gaskets or seals
Solutions:
  • Replace damaged components
  • Use new fasteners
  • Follow proper torque sequence
  • Verify correct torque specifications

Diagnostic Steps

Visual inspection, torque verification, thread assessment

1

Visual Inspection

Inspect the affected area for any visible signs of damage or wear

  • Check for cracks or deformation
  • Look for signs of excessive wear
  • Verify proper fastener installation
2

Torque Verification

Verify the torque applied to the fasteners

  • Check the torque wrench calibration
  • Verify the torque specification
  • Compare the applied torque to the specification
3

Thread Assessment

Assess the condition of the threads

  • Check for signs of thread damage
  • Verify the thread type and size
  • Check for proper thread engagement

Prevention Guidelines

Best practices, maintenance tips, tool care

Best Practices

  • Always follow the recommended torque specification
  • Use the correct type and size of fasteners
  • Verify the torque wrench calibration regularly

Maintenance Tips

  • Regularly inspect the affected area for signs of wear or damage
  • Replace damaged or worn-out components promptly
  • Keep the work area clean and organized

Tool Care

  • Regularly clean and maintain the torque wrench
  • Store the torque wrench in a dry and secure location
  • Verify the torque wrench calibration before each use

Frequently Asked Questions

Find answers to common questions about torque specifications

Q1

What IS the recommended torque value for the cylinder head bolts on a 2005-2011 Lexus GS?

The recommended torque value IS 65 ft-lbs (88 Nm) in three stages. First, tighten the bolts to 30 ft-lbs (41 Nm). Then, tighten them to 50 ft-lbs (68 Nm). Finally, tighten them to 65 ft-lbs (88 Nm) using an angle torque wrench and turning the bolts an additional 90 degrees.

Q2

What type of torque wrench should be used for critical bolts on the Lexus GS?

An angle torque wrench with a built-in protractor IS recommended for critical bolts that require precise angle tightening. For example, the cylinder head bolts require a final tightening of 90 degrees after reaching the specified torque value.

Q3

IS it safe to use an impact wrench on the bolts of a Lexus GS?

Generally, it IS not recommended to use an impact wrench on critical bolts of a Lexus GS. Impact wrenches can apply excessive torque, which may damage the bolts or the components they are attached to. Use a torque wrench to ensure accurate and safe tightening.

Q4

What are the torque specifications for the spark plugs on a Lexus GS?

The torque specification for spark plugs on a 2005-2011 Lexus GS IS 18 ft-lbs (24 Nm). Tighten the spark plugs to the specified torque value using a torque wrench to prevent overtightening or undertightening.

Q5

How often should the torque of critical bolts be checked on a Lexus GS?

The torque of critical bolts should be checked periodically, especially after any major maintenance or repair work. It IS recommended to refer to the Lexus maintenance schedule for specific intervals for torque checks.

Q6

What are the consequences of overtightening or undertightening bolts on a Lexus GS?

Overtightening bolts can lead to stripped threads, damaged components, and increased risk of failure. Undertightening bolts can result in loose components, leaks, and potential safety hazards. It IS crucial to follow the specified torque values and use a calibrated torque wrench to ensure proper tightening.

Environmental Considerations

Temperature, humidity, and seasonal effects on torque specifications

Temperature Effects

Includes: High Heat, Cold Weather, Thermal Cycling

Temperature can significantly impact torque values and fastener behavior

Cold Weather

Effects:
  • Increased material brittleness
  • Higher torque required due to thread contraction
  • Reduced thread lubricant effectiveness
Recommendations:
  • Allow components to warm to room temperature when possible
  • Consider using winter-grade thread lubricants
  • Check torque values more frequently during winter months

Hot Weather

Effects:
  • Thermal expansion of components
  • Decreased friction in threads
  • Accelerated lubricant breakdown
Recommendations:
  • Check torque when components are at normal operating temperature
  • Use temperature-resistant thread lockers
  • Consider re-torquing after heat cycles

Humidity and Corrosion

Covers: Rust Prevention, Salt Exposure, Moisture Control

Moisture and corrosion can affect fastener integrity and torque values

High Humidity

Effects:
  • Accelerated corrosion formation
  • Reduced friction coefficient
  • Potential thread seizing
Prevention:
  • Use corrosion-resistant fasteners
  • Apply appropriate anti-seize compounds
  • Maintain proper protective coatings

Salt Exposure

Effects:
  • Rapid corrosion development
  • Thread damage
  • Seized fasteners
Prevention:
  • Regular underbody washing
  • Use of sacrificial anodes where appropriate
  • Application of protective coatings

Seasonal Maintenance

Spring, Summer, Fall, and Winter maintenance schedules

Spring

  • Inspect for winter damage
  • Clean and protect exposed fasteners
  • Check torque on critical components

Summer

  • Monitor heat-affected components
  • Check expansion-related loosening
  • Inspect cooling system mounts

Fall

  • Prepare for winter conditions
  • Apply corrosion protection
  • Verify all fasteners are properly torqued

Winter

  • More frequent inspection of critical fasteners
  • Check for salt damage
  • Monitor suspension component torque

Related Resources

Tools, service procedures, and technical bulletins

Recommended Tools

Digital Torque Wrench (10-100 Nm)

Essential for tightening fasteners to precise torque specifications, preventing damage and ensuring proper assembly. This range IS suitable for many applications on the GS.

  • Digital display for accurate readings
  • Audible alarm when target torque IS reached
  • Multiple units (Nm, ft-lb, in-lb)
  • Reversible ratcheting mechanism
Learn more
Service Procedures

Engine Mounts Removal and Installation

Step-by-step procedure for removing and installing engine mounts on the Lexus GS, including torque specifications.

  • Remove the engine cover.
  • Disconnect the negative battery terminal.
  • Support the engine with a floor jack and jack stands.
  • Remove the bolts connecting the engine mount to the engine.
  • Remove the bolts connecting the engine mount to the subframe.
  • Remove the engine mount.
  • Install the new engine mount.
  • Tighten the bolts connecting the engine mount to the subframe to 59 Nm (43 ft-lb).
  • Tighten the bolts connecting the engine mount to the engine to 75 Nm (55 ft-lb).
  • Connect the negative battery terminal.
  • Install the engine cover.
View full procedure

Brake Pad Replacement

Detailed instructions for replacing brake pads on the Lexus GS, including torque specifications for the caliper bolts.

  • Remove the wheel.
  • Remove the brake caliper bolts.
  • Remove the brake caliper.
  • Remove the brake pads.
  • Clean the brake caliper and rotor.
  • Install the new brake pads.
  • Install the brake caliper.
  • Tighten the caliper bolts to 113 Nm (83 ft-lb).
  • Install the wheel.
View full procedure
Technical Service Bulletins

Engine Coolant Leak

2008-03-01

Technical Service Bulletin regarding a potential engine coolant leak on the Lexus GS, providing revised torque specifications for the coolant hose.

2008-2010 GS

Resolution: Inspect the coolant hose for leaks. If a leak IS found, replace the hose and tighten the hose clamps to 25 Nm (18 ft-lb).

Legal Disclaimer

Important information about using this content

Always refer to your vehicle's service manual and take appropriate safety precautions when performing any maintenance or repairs.

General Information
The information provided on this website is for general informational purposes only. While we strive to maintain accuracy in our content, all specifications, procedures, and technical information should be verified against your vehicle's official service manual or with the manufacturer directly.
Warranty & Liability

The content on this website is provided "as is" without any representations or warranties, express or implied. We make no representations or warranties regarding the accuracy, completeness, or availability of the information.

We shall not be liable for any direct, indirect, special, or consequential damages arising from the use of information on this website.

Technical Information
  • All specifications, including torque values, fluid capacities, and maintenance procedures, should be verified against your vehicle's factory service manual.
  • Vehicle specifications and procedures may vary by model year, trim level, and region.
  • Always follow the manufacturer's recommended procedures and safety precautions.
  • Working on vehicles can be dangerous. Always take proper safety precautions and use appropriate safety equipment.
  • If you're unsure about any procedure, consult a qualified professional mechanic.
Intellectual Property
All content, including text, images, and specifications, is protected by copyright and other intellectual property laws. Any unauthorized use or reproduction is prohibited.

About the Author

Expert automotive knowledge and experience

Alan Montanye - Automotive Technical Specialist
ASE

Alan Montanye

Automotive Technical Specialist

ASE Master Certified Technician with over a decade of hands-on experience in automotive repair and diagnostics.

Facebook Contact
15+ Years
Experience
500+ Guides
Guides
50+ Makes
Vehicles
1000+ Solutions
Solutions

Diagnostic

Specialized in advanced diagnostic techniques using modern scan tools and oscilloscopes.

Repair

Expert in both traditional mechanical repairs and modern vehicle systems.

Additional Expertise

Documentation

Created over 500 detailed repair guides and technical documents.

Training

Conducted technical training sessions and contributed to repair databases.

Certifications & Research

Certifications

  • ASE Master Technician Certification
  • Advanced Diagnostic Specialist
  • Hybrid/Electric Vehicle Systems
  • Performance Tuning Expert

Research & Community

Actively researches emerging technologies and contributes to automotive forums.

© 2025 Lexus Specs. All rights reserved.

Privacy Policy Terms of Service