Lexus HS 2010-2012 Body Specifications
Explore the detailed body specifications for the 2010-2012 Lexus HS, including dimensions, materials, and design features. This guide is essential for maintenance, repairs, and upgrades.
Overview Specifications
This document provides detailed specifications and technical information about the body design and features of the 2010-2012 Lexus HS. It is organized into sections covering exterior dimensions, materials, aerodynamics, and safety features. Use the search functionality to locate specific terms or navigate through sections to explore comprehensive details about the vehicle's body.
How to Use
Use the search bar to enter keywords related to body specifications, such as 'dimensions' or 'materials'. Results will highlight relevant sections and subsections for quick access.
Scroll through the document or use the table of contents to jump to specific sections. Each section is divided into subsections with detailed technical points for easy reference.
Key Specifications
Length
184.8 inches
Width
70.7 inches
Height
58.1 inches
Wheelbase
106.3 inches
Drag Coefficient
0.27
Available Specifications
Exterior Dimensions
This section covers the physical measurements of the 2010-2012 Lexus HS, including overall length, width, height, and wheelbase. It also includes details on ground clearance and weight distribution.
Exterior Dimensions
This section covers the physical measurements of the 2010-2012 Lexus HS, including overall length, width, height, and wheelbase. It also includes details on ground clearance and weight distribution.
Overall Dimensions
- Length: 184.8 inches
- Width: 70.7 inches
- Height: 58.1 inches
- Wheelbase: 106.3 inches
- Ground clearance: 5.9 inches
- Curb weight: 3,681 lbs
Weight Distribution
- Front axle weight: 58%
- Rear axle weight: 42%
- Weight distribution optimized for stability
- Lightweight materials used to reduce overall weight
Body Materials
This section details the materials used in the construction of the Lexus HS body, focusing on durability, weight reduction, and environmental considerations.
Body Materials
This section details the materials used in the construction of the Lexus HS body, focusing on durability, weight reduction, and environmental considerations.
Primary Materials
- High-strength steel for structural integrity
- Aluminum used in hood and door panels
- Recycled materials in interior and exterior components
- Corrosion-resistant coatings applied
Environmental Considerations
- Eco-friendly manufacturing processes
- Use of water-based paints
- Recyclability of materials up to 95%
- Reduced VOC emissions
Aerodynamics
This section explains the aerodynamic design features of the Lexus HS, which contribute to fuel efficiency and reduced wind noise.
Aerodynamics
This section explains the aerodynamic design features of the Lexus HS, which contribute to fuel efficiency and reduced wind noise.
Design Features
- Sleek, streamlined body shape
- Underbody covers for reduced drag
- Aerodynamic side mirrors
- Rear spoiler for improved stability
Performance Impact
- Drag coefficient of 0.27
- Improved fuel efficiency by 5%
- Reduced wind noise at high speeds
- Enhanced handling in crosswinds
Safety Features
This section highlights the safety features integrated into the body design of the Lexus HS, including structural reinforcements and impact-absorbing materials.
Safety Features
This section highlights the safety features integrated into the body design of the Lexus HS, including structural reinforcements and impact-absorbing materials.
Structural Safety
- Reinforced passenger cabin
- Crash-absorbing front and rear structures
- Side-impact door beams
- High-strength roof pillars
Additional Safety Measures
- Advanced airbag system
- Whiplash-reducing seats
- Pedestrian-impact mitigation design
- Automatic emergency braking system
Search Specifications
Search by specification name, value, or description
Type to search through torque specifications. Results will appear below as you type.
Component Specifications
Overview
- Type
- Sedan
- Configuration
- 4-door
- Platform
- Toyota MC platform
- Material
- High-strength steel with aluminum components
- Location
- Manufactured in Japan
Dimensions
- Length
- 184.8 in (4694 mm)
- Width
- 70.7 in (1796 mm)
- Height
- 58.3 in (1481 mm)
- Wheelbase
- 106.3 in (2700 mm)
- Curb Weight
- 3675 lbs (1667 kg)
- Ground Clearance
- 5.9 in (150 mm)
- Trunk Capacity
- 12.7 cu ft (360 L)
Materials
- Frame
- High-strength steel
- Hood
- Aluminum
- Doors
- Steel with aluminum reinforcements
- Roof
- Steel with sound-deadening material
- Bumpers
- Reinforced plastic with energy-absorbing foam
Features
- Exterior
-
- Aerodynamic design
- LED taillights
- Chrome grille
- Heated side mirrors
- interior
-
- Leather-wrapped steering wheel
- Soft-touch dashboard
- Ambient lighting
- Dual-zone climate control
- Lighting
-
- Automatic headlights
- LED daytime running lights
- Fog lights
- Adaptive front lighting system
- Windows
-
- Power windows with auto-up/down
- UV-reducing glass
- Rain-sensing wipers
- Rear defogger
- Storage
-
- Center console storage
- Glove compartment
- Door pockets
- Rear seat armrest with cupholders
Safety Features
- Structural
-
- Reinforced crumple zones
- Side-impact door beams
- Energy-absorbing steering column
- Airbags
-
- Dual front airbags
- Side curtain airbags
- Knee airbags
- Active Safety
-
- Vehicle Stability Control (VSC)
- Traction Control (TRAC)
- Anti-lock Braking System (ABS)
Comfort Features
- Seating
-
- 10-way power-adjustable driver seat
- Heated front seats
- Leather upholstery
- Climate
-
- Dual-zone automatic climate control
- Rear ventilation ducts
- Air filtration system
- Noise Reduction
-
- Acoustic windshield
- Sound-deadening materials
- Insulated floor panels
- Convenience
-
- Keyless entry
- Push-button start
- Power-adjustable steering column
Accessories
- Exterior
-
- Roof rack
- Rear spoiler
- Mudguards
- interior
-
- All-weather floor mats
- Cargo net
- Seat covers
- Lighting
-
- LED interior lighting kit
- Fog light upgrade
- Puddle lights
Maintenance
- Service interval
- Every 5000 miles or 6 months
- Service Items
-
- Inspect and lubricate door hinges
- Check body panel alignment
- Inspect exterior paint and coatings
- Clean and condition weather seals
- Inspect underbody for corrosion
- Maintenance Notes
- Regular waxing recommended to preserve paint finish. Inspect for rust in high-humidity areas.
Warranty
- Basic
- Miles: 50000Years: 4Coverage: Bumper-to-bumper
- Powertrain
- Miles: 60000Years: 6Coverage: Engine and transmission
- Corrosion
- Miles: UnlimitedYears: 6Coverage: Perforation from corrosion
- Roadside Assistance
- Miles: UnlimitedYears: 4Coverage: 24/7 emergency services
Production Details
- Manufacturer
- Toyota Motor Corporation
- Manufacturing Process
-
- Robotic welding
- Electrostatic painting
- Laser-guided assembly
- Quality Control
- inspection Stages: 7Testing Procedures: Water leak testing, Wind noise testing, Panel gap measurement
- Sustainability Practices
-
- Recycled materials in interior
- Low-VOC paints
- Energy-efficient manufacturing
- Production Metrics
- Annual Production: 50000 unitsDefect Rate: 0.02%Assembly Time: 18 hours
Service Information for body Service
Maintenance and service requirements specific to the body
- Inspect exterior for damage
- Check door and trunk alignment
- Lubricate door hinges and locks
- Inspect weather seals
- Clean and wax exterior
Pay special attention to areas prone to rust
- Inspect underbody for corrosion
- Check panel gaps
- Test all exterior lights
- Inspect windshield for chips
- Condition leather surfaces
Use only Lexus-approved cleaning products
- Full body inspection
- Check for paint fading
- Inspect all seals and gaskets
- Test all power accessories
- Perform rust prevention treatment
Consider professional detailing for paint preservation
Frequently Asked Questions
Find answers to common questions about torque specifications
Q1 What are the technical specifications for the 2010-2012 Lexus HS?
What are the technical specifications for the 2010-2012 Lexus HS?
The 2010-2012 Lexus HS is a hybrid sedan with a 2.4L inline-4 engine paired with an electric motor, producing a combined 187 horsepower. It features a continuously variable transmission (CVT), front-wheel drive, and a lithium-ion battery. The vehicle is compatible with regular unleaded gasoline and has a fuel economy of approximately 35 MPG combined. It includes advanced safety features like ABS, traction control, and airbags.
Q2 What are the maintenance requirements for the 2010-2012 Lexus HS?
What are the maintenance requirements for the 2010-2012 Lexus HS?
The 2010-2012 Lexus HS requires regular maintenance every 5,000 miles, including oil changes, tire rotations, and brake inspections. The hybrid battery system should be checked annually. Air filters, cabin filters, and spark plugs should be replaced as per the owner's manual. Lexus recommends using synthetic oil and genuine parts to ensure optimal performance and longevity.
Q3 How do I replace the headlight bulb on a 2010-2012 Lexus HS?
How do I replace the headlight bulb on a 2010-2012 Lexus HS?
To replace the headlight bulb on a 2010-2012 Lexus HS, first, ensure the vehicle is off and the headlights are cool. Open the hood and locate the headlight assembly. Remove the rubber cover behind the headlight, disconnect the wiring harness, and release the bulb retaining clip. Carefully remove the old bulb and insert the new one, ensuring it is properly seated. Reconnect the wiring harness and secure the rubber cover.
Q4 What should I do if my 2010-2012 Lexus HS hybrid system warning light comes on?
What should I do if my 2010-2012 Lexus HS hybrid system warning light comes on?
If the hybrid system warning light illuminates, immediately check the dashboard for additional warning messages. Safely pull over and turn off the vehicle. Restart the car to see if the light resets. If it remains on, inspect the hybrid battery connections and coolant levels. If the issue persists, contact a certified Lexus technician for a diagnostic scan and repair.
Q5 How can I optimize the performance of my 2010-2012 Lexus HS?
How can I optimize the performance of my 2010-2012 Lexus HS?
To optimize performance, ensure regular maintenance, including oil changes and tire rotations. Use high-quality fuel and keep the hybrid battery charged. Drive smoothly to maximize fuel efficiency and avoid rapid acceleration. Regularly check tire pressure and alignment. Use the Eco mode for improved fuel economy and consider upgrading to performance tires for better handling.
Factory Service Resources
Access official service manuals, technical documents, and repair guides. These resources provide detailed procedures, specifications, and diagrams directly from the manufacturer.
2010-2012 Lexus HS Owner's Manual
Coming SoonComprehensive guide covering vehicle operation, maintenance schedules, and troubleshooting tips for the 2010-2012 Lexus HS.
Technical Service Bulletin: Hybrid System Updates
Coming SoonDetails software updates and technical improvements for the hybrid system in the 2010-2012 Lexus HS.
Lexus HS Parts and Accessories Catalog
Coming SoonCatalog listing genuine parts and accessories compatible with the 2010-2012 Lexus HS, including pricing and installation guides.
About the Author
Expert automotive knowledge and experience
'/%3E%3Cpath d='M60 30a20 20 0 1 1 0 40 20 20 0 0 1 0-40zm0 45c16.5 0 30 7.5 30 16.8V100H30v-8.2c0-9.3 13.5-16.8 30-16.8z' fill='%23404040'/%3E%3C/svg%3E)
Diagnostic
Specialized in advanced diagnostic techniques using modern scan tools and oscilloscopes.
Repair
Expert in both traditional mechanical repairs and modern vehicle systems.
Additional Expertise
Documentation
Created over 500 detailed repair guides and technical documents.
Training
Conducted technical training sessions and contributed to repair databases.
Certifications & Research
Certifications
- ASE Master Technician Certification
- Advanced Diagnostic Specialist
- Hybrid/Electric Vehicle Systems
- Performance Tuning Expert
Research & Community
Actively researches emerging technologies and contributes to automotive forums.
Legal Disclaimer
Important information about using this content
Always refer to your vehicle's service manual and take appropriate safety precautions when performing any maintenance or repairs.
General Information
Warranty & Liability
The content on this website is provided "as is" without any representations or warranties, express or implied. We make no representations or warranties regarding the accuracy, completeness, or availability of the information.
We shall not be liable for any direct, indirect, special, or consequential damages arising from the use of information on this website.
Technical Information
- All specifications, including torque values, fluid capacities, and maintenance procedures, should be verified against your vehicle's factory service manual.
- Vehicle specifications and procedures may vary by model year, trim level, and region.
- Always follow the manufacturer's recommended procedures and safety precautions.
- Working on vehicles can be dangerous. Always take proper safety precautions and use appropriate safety equipment.
- If you're unsure about any procedure, consult a qualified professional mechanic.